www.lineartools.co.uk
12
Metric&Inch2Sided ChromeFinishSteelRules
Double Squares
AudioEdge Finder
EECClass1
• Invalauble for precisely positioning tool holder relative to the workpiece on C.N.C. and standard type machine tools. • When in contact with the workpiece edge this highly sensitive tool emits a clear ‘beep’ together with highly visible LED red light • Contact Ball Dia: 10mm± .001mm • Ball Stem Length: 46mm • Mounting Shank 20mm Dia: ± 0.012mm X 72mm long • Overall length: 153mm
• Blade is hardened, tempered and satin chrome plated for longer life. • Graduation Readings: 7104-264: F:32nds & 0.5mm R:64ths & 1.0mm 7104-754: Both sides 0.5mm & 1.0mm 7105-756: Both sides 0.5mm & 1.0mm 7105-266: F:32nds & 0.5mm R:64ths & 1.0mm
• Metric & inch two sided • Satin chrome finish, D-end style • Front side: 16ths, 32nds, 64ths, 10ths, 20ths, 50ths, 100thsths • Reverse side: 1.0mm, 0.5mm
PDF 1273 CLICK FOR
• Repeatability: Within .006mm • Powered by 12v 23-A battery
Order Code
Description/ Size 100mm/4” 100mm 150mm 150mm/6”
List Price
Order Code 678-006F 678-012 678-024 851-006F
List Price £8.90 £14.70 £43.20 £8.80
Description/ Size 150mm/6” 300mm/12” 600mm/24” 150mm/6”
Rule Type Rigid Rigid Rigid Flexi
Offer Price
Offer Price £5.80 £9.60 £28.10 £5.70
Order Code AUD-EF
Description/Size Audio Edge Finder
£50.20 £50.20 £55.90 £55.90
7104-264 7104-754 7105-756 7105-266
£35.15 £35.15 £39.10 £39.10
List Price £169.20
Offer Price £118.40
Metric&Inch2Sided TINFinishSteelRules EECClass1
Hi-Vizmeasuring TapesEECClass2
Combination Square
PDF 1275 CLICK FOR
• 4 Piece Combination Set • Blade, Square Head, Centre Head & Protractor • Blade is fully hardened and tempered • Hardened steel square head 90 & 45 angles • Hardened centre head • Inch/Metric Rule • Double indexed protractor is graduated 180 degrees in both directions
• Tough plastic cases, bright colours for high visibilty. • Power return lock, sliding tape lock. • Yellow wear resistant tape coating. • Marked: feet, inches, 1/32”, 1/16” & 1/8”, cm & mm.
• Metric & inch two sided • TIN Coated finish, D-end style • Front side: 16ths, 32nds, 64ths, 10ths, 20ths, 50ths, 100thsths • Reverse side: 1.0mm, 0.5mm
Order Code 678-006FTN 678-012TN 851-006FTN 851-012TN
List Price
Description/ Size 150mm/6” 300mm/12” 150mm/6” 300mm/12”
Rule Type Rigid Rigid Flexi Flexi
Offer Price
Offer Price £1.85 £5.80 £10.20
Description/ Size
Order Code LT-3M LT-5M LT-7M
List Price
Order Code 7127-012H
Description/Size Combination Square
£26.20 £46.00 £26.10 £45.00
£18.30 £32.20 £18.30 £31.50
Hi-Viz Tape 3m Hi-Viz Tape 5m Hi-Viz Tape 7m
£2.66 £5,80 £10.20
List Price £217.00
Offer Price £151.90
RoundBar CentreFinder
Wiggler Set
Electronic Level
• Large LCD Display with optional illuminated backlight
PDF 1104 CLICK FOR
• Made from precision ground tool steel • Includes offset indicator holder & improved chuck design for holding attachments •Attachments readily interchangeable • Tool adapts to countless applications • Attachments snap into chuck & clamp to ball swivel joint which permits adjustments to angular positions or true concentricity
• 2 modes: Protractor and Level • Measuring range: 4 x 90 degrees • Resolution: 0.1 degree • Accuracy: +/- 0.3 degrees • Audible signal at: 0, 10, 20, 30, 40, 50, 60, 70, 80, & 90 degrees • Dimensions: 150 x 50 x 33mm • Power supply: 3 x CR 2032 Lithium batteries
• Accurately and quickly locates centre on round work pieces. • 3/8” shank located in drill chuck or collet. • Centre obtained when pointer lines up with line on shaft. • Satin Chrome Finish.
Order Code 4200-100
Description/Size Centre Finder
Order Code 4100-004
Description/Size Wiggler Set
Order Code 59-017-150
Description/Size Level/Protractor
List Price £26.60
List Price £32.60
List Price £95.00
Offer Price £18.60
Offer Price £22.80
Offer Price £66.50
Made with FlippingBook Ebook Creator