Chimney Covers Custom Made Band-Around
Aluminum and Stainless Steel
ALUMINUM
Custom covers can be built to fit virtually any size chimney. Aluminum is recommended for most applications for low cost and minimal maintenance requirements.
Maximum base size: 60”wide x 96” long
STAINLESS STEEL Stainless Steel is recommended for use with coal or oil burning heating appliances. Backed by HY-C’s Lifetime LimitedWarranty.
The hood overhangs masonry approximately 3” on both sides and ends. The cover attaches securely to the chimney with a 21/4” draw band. Four adjustable corner clamps provide flexibility for proper fit.
Maximum base size: 48”wide x 96” long
Example Top View
How To Order: 1) Measure the outside dimension of all four sides of the top row of brick. 2) Measure the tile height from the top of the first row of brick, to the top of the tallest tile.
36 1/2”
Tile
Tile
Tile
36”
Any questions, call: 1-800-325-7076
18” Braces
15” Braces
12” Braces
9” Braces
12”
9”
9”
6”
3 1/2” 6”
3 1/2”
Standard 9” braces and expanded metal mesh are used when flue tile height is 31/2” or less. If tile height is greater, refer to the chart.
Note:
All custom chimney covers are shipped knocked down.
All units ≥ 32”width will be shipped with a minimum of 12”mesh.
All custom chimney covers arrest sparks and reduce certain downdrafts.
In situations where oil or coal is burned, or when wood or pellets are used as the primary source of heat, do not use aluminum covers.
Made in the U.S.A.
12
Made with FlippingBook - professional solution for displaying marketing and sales documents online