TESCO Catalog 2026

Catalog No. PO2-0803

TESCO Potential Transformer Test Companion

TESCO’s Potential Transformer Test Companion (Catalog No. P02-0803) is a two-piece, True RMS voltage measurement system that enables safe measurement of primary distribution voltages up to 40 kV. Using a fiber- optic link, a high-voltage sensor mounted on a hot stick (hot stick not included) communicates measured voltage information to a receiver unit at ground potential, providing complete electrical isolation for enhanced operator safety. Integrated with the Meter Site Analyzer (Catalog No. 6330), the system delivers primary voltage measurements for in-service PT/VT ratio verification, waveform capture and recording. The 6330 uses the primary voltage measured by the PT Test Companion and the secondary voltage measured by the analyzer to automatically calculate and compare the PT/VT ratio against the transformer’s nominal ratio, enabling rapid assessment of PT/VT performance without removing the transformer from service. Designed to be used with your existing hot sticks. Components included in kit: 40 kV Volt LiteWire, fiber optic linked sensor, analog output , hook, 7-047 insulated electrode, P00-RA-BNC 6330 probe adapter cable (calibrated by TESCO for usage with the 6330) and Pelican case. Hot stick not included.

POTENTIAL TRANSFORMER TEST COMPANION CATALOG NO. PO2-0803

SPECIFICATIONS Range of Operation Voltage

1000 V - 40 kVAC

Resolution Voltage Voltage Weight Accuracy

0-20 kVAC 10 V

20+ kVAC

100 V

14 lbs., 6.35 kg

±2%

Analog Output

50 mv per kV (2 volts = 40 kV) 420 Ω maximum

Output Impedance Frequency Response

2500 Hz, which is above the 40th Harmonic at 50 Hz or 60 Hz

Operation

Controls Electrodes

Single button switch operation per unit. One switch on the transmitter, one switch on the receiver

Detachable 47 to 53 Hz 57 to 63 Hz

Frequency, 50 Hz Frequency, 60 Hz

Mechanical Display Housing

5 Digit Display on Receiver

Shock & water resistant molded urethane Universal chuck adapter (hot stick not included) Two each 9 V alkaline or lithium; one per unit Minimum 4 hours of continuous use

Hot Stick Mounting

Battery

Battery Life

Operating Temperature

-22° to 140° F, -30° to 60° C Lithium battery required for use below -4° F (-20° C)

Fiber Optic Cable Length

40’, 12.19 m 100 kV per foot

Isolation

TESCO Metering 925 Canal Street · Bristol, PA 19007 · Phone: 215.228.0500 tescometering.com

2026 V5

117

Made with FlippingBook - Share PDF online