L OW IMPEDANCE VOLTAGE TESTER (CONT.)
unique dual-mounting system makes possible single-hand testing. Stainless Steel Prods/ Flat-Tip Design: Prods are made from hard stainless steel, which will not rust and which resists wear and bending; the ends of the prods are especially flattened to facilitate using the prods in narrow openings (such as small convenience outlets). Prod Insulation: Sturdy, 4 11 long laminated phenolic prod handles provide tough, moisture and oil-resistant non- warping insulation. The stainless steel tips are nylon- insulated to within 9/16" of the point for additional protection. Thus, the operator has the protection of more than 5" of insulation, and there is almost no chance of causing shorts between prods. QUALITY DESIGNED ... QUALITY BUILT: Knopp products are backed by more than 70 years of experience in the design and manufacture of electrical test equipment. Knopp, Inc., pioneered numerous major improvements in voltage test devices, including dual voltage indication, polarity indication, strain relief lead anchorage in both case and prod handles, the use of stainless steel for prod tips, and the prod mount. Knopp quality and dependability are bywords in the industry and are your assurance the Knopp Voltage Testers are the best ever built, incorporating every possible advance in design and quality construction.
specifications Voltage Measurements: Operating on the solenoid principle, these dependable Knopp Voltage Testers tell whether the circuit is opened or closed, indicate the nominal AC circuit voltages of 120, 240, 480, and 600, and the nominal DC circuit voltages of 120,240, and 600, whether the voltage is 25 or 60 Hz. Polarity Determination: The polarity of DC circuits can be quickly and positively determined with the neon-light polarity indicator featured in the Knopp K-60 model. A-C, Pure DC, and Rectifier DC Identification: Vibration and humming of the testers indicate that the circuit is AC or unfiltered rectified DC, since there is no hum or vibration with pure DC. Rectifier DC (pulsating DC) can be easily distinguished from AC with the aid of the neon lamp in the tester. Compactness and Ease-of-Handling: The Knopp Voltage Tester features its exclusive, cylindrical SLIM-GRIP design that fits securely and comfortably in your hand, and in addition, the K-60 provides the alternative "pistol grip" for reaching into deep and tight test places. The housing diameter is less than an inch and a quarter (1.25"). When the prods are stored, the K-60 is exceptionally compact and is easily carried in the pocket or pouch. And the
SPECIFICATIONS
Approx. Dimenstions
Approx. Weight
Dual
Polarity Indication
Prod
cat. No
Model
Voltage Scales
Voltage Indication
case
Lead
Storage
Diam.
Net
Ship
Length
Length
AC 120, 240 480, 600
Yes
14460
K-60
Yes
Yes
1-3/16"
6-3/8"
26"
9 oz.
13-14 oz.
DC 120, 240, 600
14480 Cordura Carrying Case
14475 Lead Assembly Set consisting of pair of leads with handles and prod tips (on red and one black) plus two lead anchors for securim1 leads in tester case.
Fused leads are available at an additional cost.
Knopp, Inc., a TESCO Company 925 Canal Street, Bristol, PA 19007 I 215-228-0500 Iwww.knoppinc.com
Made with FlippingBook - Share PDF online