Catalog No. 300-2 TESCO Hot Socket Gap Indicator
The TESCO Hot Socket Gap Indicator is used to determine if a meter socket jaw has become worn-out and unsafe for continued use. The Gap Indicator determines unsafe holding force on meter socket jaws based on laboratory testing. Features: • Easy-to-use design • Determines unsafe holding-force on meter socket jaws based on laboratory testing • Blade spring force was designed to effectively determine a minimum unsafe threshold • Insulated plastic body (Rated 3000 V) • Tin-plated spring steel blade used to withstand daily use/travel/vibration • No maintenance required • Calibrated for five years or 1,000,000 sockets (whichever occurs first) The TESCO Hot Socket Gap Indicator is quick, easy-to-use and has a rugged, non-conductive insulated shell. The mechanical tool engages the jaws of a meter socket and will indicate a gap or significant loss of jaw pre-load. Total estimated time of testing four jaws is less than 30 seconds. Even minor gaps can result in electrical arcing, resulting with a more serious problem, failure, or electrical fire. Note: If feasible, service should be disconnected. Regardless of whether the service has been disconnected or is live, personal protective equipment (PPE) should always be used while operating. Accessory:
HOT SOCKET GAP INDICATOR WIDE BLADE CATALOG NO. 300-2
No indication of a “bad” socket gap/loss of spring force.
Catalog No. 302 HSGI Calibration Fixture. The Hot Socket Gap Indicator (HSGI) is calibrated for five years. Instead of sending your units back to TESCO for recalibrattion, you can perform the process in your meter shop using the calibrated and traceable HSGI Calibration Fixture. In three simple steps, you can verify the calibration of your HSGI.
X
Red indication of a “bad” socket gap/loss of spring force.
TESCO Metering 925 Canal Street · Bristol, PA 19007 · Phone: 215.228.0500 tescometering.com
99
Made with FlippingBook - Share PDF online