ALUMINUM TRUSS HEAD PIN DRIVE ANCHORS, TRUSS HEAD NAIL DRIVE ANCHORS, NYLON NAIL DRIVE ANCHORS
TRUSS HEAD PIN DRIVE ANCHORS ALUMINUM
NAIL DRIVE ANCHORS TRUSS HEAD - 1/4 KEGS
SPEED# Size
Drill Size
Box Qty
Box/Case
Wgt/C
SPEED# Size
Drill Size
Box Qty 2000 1500 1500 1000 1000 1000
Box/Case
Wgt/C
54853 1/4 x 3/4 54854 1/4 x 1
1/4 1/4
100 100
30 25
1.0 1.2
07866 1/4 x 1 07867 1/4 x 1-1/4 07868 1/4 x 1-1/2 07869 1/4 x 2 53269 1/4 x 2-1/2 53270 1/4 x 3
1/4 1/4 1/4 1/4 1/4 1/4
1 1 1 1 1 1
1.9 2.2 2.5 3.3 3.7 4.4
NAIL DRIVE ANCHORS TRUSS HEAD
SPEED# Size
Drill Size
Box Qty
Box/Case
Wgt/C
04065 3/16 x 7/8 07865 1/4 x 3/4 04066 1/4 x 1 04067 1/4 x 1-1/4 04068 1/4 x 1-1/2 04069 1/4 x 2 09663 1/4 x 2-1/2 09664 1/4 x 3 53271 1/4 x 4
3/16 1/4 1/4 1/4
100 100 100 100 100 100 100 100 100
20 20 12 12
1.0 1.7 2.0 2.2 2.5 3.2 3.9 4.7 6.1
NYLON NAIL DRIVE ANCHORS TRUSS HEAD
SPEED# Size
Box Qty
Box/Case
Wgt/C
1/4 1/4 1/4 1/4 1/4
9 6 4 4 3
50195 1/4 x 3/4 - White 50199 1/4 x 3/4 - Almond
100 100 100
25 25 15 25
0.2 0.2 0.2 0.3
50196 1/4 x 1 50197 1/4 x 1-1/2
50
NYLON NAIL DRIVE ANCHORS ROUND HEAD
SPEED# Size
Drill Size
Box Qty
Box/Case
Wgt/C
07872 1/4 x 1 07873 1/4 x 1-1/2 07874 1/4 x 2
1/4 1/4 1/4
100 100 100
15 12
0.6 0.8 1.0
9
NYLON NAIL DRIVE ANCHORS MUSHROOM HEAD
Drill recommended hole size in masonry. Drill size listed above. Depth should equal or exceed the length of nail drive anchor. Insert nail drive or nylon nail drive through fixture and into drilled hole. Hammer nail head or tighten screw until flush with head of anchor.
SPEED# Size
Drill Size
Box Qty
Box/Case
Wgt/C
04075 3/16 x 1 04076 1/4 x 3/4 04077 1/4 x 1 04078 1/4 x 1-1/2 04079 1/4 x 2 04080 1/4 x 3 07870 1/4 x 4 52436 3/16 x 3/4
3/16 1/4 1/4 1/4
100 100 100 100 100 100 100 100
15 20 15
0.5 0.5 0.6 0.8 1.1 1.9 2.5 0.5
9 8 4 4
1/4 1/4 1/4
25
Made with FlippingBook Digital Proposal Creator