Phillips screwdriver or driver bit
•
• Eye protection & gloves (recommended)
Safety first 1. Always unplug the Hurricane Tube from power before beginning. 2. Wear eye protection while drilling. 3. Keep small screws and beads away from children/patients.
Procedure 1. Prepare the tube 1.1 Unplug the Hurricane Tube. 1.2 Remove the cap and pour out the existing beads — set beads aside or discard per site policy. 1.3 Remove the 4 screws securing the white base cover. Discard those screws. 1.4 Remove and set the white base cover aside.
2. Replace two rubber feet with longer screws 2.1 Lay the tube and base on their side. 2.2 Remove the front-top-left and back-bottom-right rubber feet and discard the original screws. 2.3 Position each rubber foot and hand-thread a 2" screw through the base into the foot; stop when the screw head is flush with the bottom of the foot
Made with FlippingBook - professional solution for displaying marketing and sales documents online