BlueCool A-Series Flow Control Valve
Valve with motor actuator
Kit Motor Valve Slimline / Low profile A-Series with 90° elbow
Kit Motor Valve Compact A-Series
Part numbers
WBCL151004
WBCL151003
Valve with thermal actuator*
Kit Therm Valve Slimline / Low profile A-Series with 90° elbow
Kit Therm Valve Compact A-Series
Part numbers
2510181
2510182
* Valves with thermal actuator are suitable for A-Series model from A4 up to A18. Due to their longer activation time they are not suitable to be operated in permanent blower mode.
Flow control valve for Slimline and Low Profile
Flow control valve for Compact
The flow control valve acts as a 3 / 2-way valve allowing the chilled water to bypass the heat exchanger of the A-Series when needed Easy screw connection to all A-Series units, no soldering needed Easy electrical connection to A-Series electronics 90° elbows in the Slimline / Low profile kit enable an extra flat installation The flow control further increases the comfort on board by: – directing the chilled water only to those cabins with cooling / heating demand – prevent inadvertent heating when air handler is switched off – no chimney effect – prevents condensate build-up and thus mold on heat exchangers of air handlers which are switched off – continuous blower operation is possible thus reducing noise variations in cabins Valve needs to be fitted if EHM is installed to prevent simultaneous heating and cooling
165
Made with FlippingBook Online newsletter