Coolant Heaters Thermo Pro 90/ Thermo Pro 90 Chiller
Thermo Pro 90 Marine – State-of-the Art Controller and Easy Service This device is ideal for daily use: infinitely variable power adjustment, high heat output, compact dimensions, service-friendly technology and an extremely low noise level. Thermo Pro 90 Chiller – the heater for integration into an A/C system If you want to build a BlueComfort system with a Thermo 90 heater, use the Thermo Pro 90 Chiller version. It comes with a special electronic control unit and without the water pump which is not needed.
The advantages of the Thermo Pro 90: Ideal for daily use Infinitely variable power adjustment High heat output Compact dimensions Service friendly technology Extremely low noise level
This 44’ sailing yacht uses convectors for all cabins to heat the boat. Convectors are noiseless and do not consume any electrical power off the battery, therefore resulting in a very high electrical autonomy.
In this 40’ motor yacht electrical fan blowers are used to heat up the boat. They are very compact and may be easily installed in small spaces, blowing hot air through air ducts into each cabin. The windscreen has a separate blower to demist and defrost.
Technical specifications
Thermo Pro 90
Thermo Pro 90 Chiller
EC approval mark ECE R122 (Heating) EC approval mark ECE R10 (EMC) Heating power, control range / boost (kW) Heating power, control range / boost (BTU/ h) Fuel consumption, control range / boost (l / h) Fuel consumption, control range / boost (gal / h)
E1 00 0320 E1 04 6196
E1 00 0320 (ECE R122) E1 04 6196 (ECE R10) 1.8 – 7.6 / 9.1 6,100 – 26,000 / 31,000
1.8 – 7.6 / 9.1 6,100 – 26,000 / 31,000
0.18 – 1.08 / 1.3 0.05 – 0.24 / 0.34
0.18 – 1.08 / 1.3 0.05 – 0.24 / 0.34
Fuels*
Diesel DIN EN 590
Diesel DIN EN 590
Rated voltage (V)
12, 24
12, 24
Rated power consumption, control range / boost (W) Rated power consumption, control range / boost (amps)
20 – 83 / 90 3.0 – 6.9 amps / 7.5 at 12 V, 1.5 – 3.5 / 3.8 at 24 V
20 – 83 / 90 3.0 – 6.9 amps / 7.5 at 12 V, 1.5 – 3.5 / 3.8 at 24 V
Flow rate of coolant pump (against 0.3 bar) (l / h) Flow rate of coolant pump (against 0.3 bar) (gal /min.)
700 3.1
700 3.1
Dimensions L x W x H (mm) Dimensions L x W x H (inch)
352 x 131 x 232 13.9 x 5.2 x 9.1
352 x 131 x 232 13.9 x 5.2 x 9.1
Weight (kg) Weight (lbs)
4.9 10.8
4.9 10.8
* Information about further fuels on request.
32
Made with FlippingBook Online newsletter