Build Your HVAC Kit
To begin configuring your custom kit, start by choosing an option from each of the eight categories below that best fits your vehicle application requirement. Then, contact your Webasto HVAC representative to review your selections and complete your kit build.
Not sure where to start? No problem! Contact your Webasto representative at any time for further assistance.
VAC Basic Kit Contents: Cooling only evaporator unit, air diffuser, condensate hose, TXV & misc. hardware HVAC Basic Kit Contents: Heating & Cooling evaporator unit, air diffuser, condensate hose, coolant pump, coolant valve & fittings, coolant clamps, TXV & misc. hardware
Select Evaporator Basic Kit (Kits Include Basic Air Distributors) 1
Kit P/N
Description
5013974
Tie-in or Independent*, Horizontal Mount
Sedona (VAC) Basic Kit without Thermostat
5013836
London (HVAC) Basic Kit without Thermostat
Tie-in or Independent*, Horizontal Mount
5014052
Marbella (VAC) Basic Kit with Thermostat
Tie-in or Independent, Vertical Mount
5013817
Ibiza (HVAC) Basic Kit with Thermostat
Tie-in or Independent, Vertical Mount
5013838
Thermostat for Sedona & London
Independent Kit*
*Add thermostat 5013838 ONLY if building an independent system with the Sedona & London basic kits.
Note: When building independent systems, a secondary compressor / mount kit must be purchased separately through either Webasto or Customer sourced directly.
Capri Roof Top Kit Contents: Capri Roof Top condenser, filter/dryer (contained within), misc. mounting hardware Universal and Sprinter Underbody Condenser Kit Contents: Underbody condenser, filter/dryer, universal underbody mounting brackets & hardware
Select Condenser (For Independent Systems Only) 2
Kit P/N Description 62U00025456 Capri Condenser
Independent, Roof Top
5013770
Independent, Underbody
Universal Condenser
5013785
Sprinter Condenser
Independent, Underbody
Select Wiring / Controller 3
Wiring Harnesses & Controller Kit Contents: Controllers, power & ground wiring, signal wiring, relay board (Independent Systems) Additional: Bracket for ProMaster Vans - non-dashboard installment
Kit P/N
Description
5013844
Tie-in
Wire Harness Kit - Neo 1 Controller (VAC)
5013843
Tie-in
Wire Harness Kit - Neo 2 Controller (HVAC)
5013847
Wire Harness Kit - Neo 2+ Controller (HVAC)
Tie-in with Digital Control; Independent*
5013841
Wire Harness Kit - Neo 1 Controller (VAC)
Independent
5013842 Independent Choose one of the following ONLY if the controller will be installed to the left of steering column (within a ProMaster): 5013002 Bracket - control head Neo 1 ProMaster 2014-2021 5012805 Bracket - control head Neo 2 ProMaster 2014-2021 Will also work for Neo 2+ Controller Wire Harness Kit - Neo 2 Controller (HVAC) *On tie-in systems, Webasto does not control the OE A/C compressor. If installed as tie-in, automatic temperature control is limited. For true automatic temperature control, purchase 5013847 in combination with 5013842 only when building an independent HVAC system.
12
Made with FlippingBook Online newsletter