HYDRAULIC CYLINDERS
CHIEF™ WX WELDED CYLINDERS - 3000 PSI
CYLINDERS
FEATURING AN ADJUSTABLE 360 DEGREE ROTATING GLAND!
The Chief WX cylinder is ideal for applications where port adjustability and overall cylinder space is restricted. This cylinder has become popular in applications where the same size cylinder can be used in a variety of directions and port positions. • Adjustable 360 degree rotating gland • Recessed ports: One located on the rotating gland and two on the fixed base • Adjustments made using a spanner wrench to rotate the gland • Intended Use: Double-acting applications • Piston: Ductile iron with wear rings • Base End Mount: Steel crosstube with grease zerk • Tube Seal: Buna o-ring with polytemp hytrel backup • Rod Seal: Twin Lip design • Rod Wiper: D-style prevents contamination • Piston Seal: Hallite 755 provides prolonged wear resistance • Piston Wear Ring: Nylon, glass filled • Painted Black • 3 year limited warranty • Gland: Keyed joint ductile iron • Tube: Precision honed steel • Rod: Nitride steel bar, scratch resistant and corrosion resistant • Rod End Mount: Rod width steel cross tube with grease zerk
CYLINDER COMPONENTS
JACKS
LEFT
VALVES
G
MOTORS
PUMPS
ENGINES
RIGHT
POWER UNITS
Note: See Page 45 for Spanner Wrench. 322269 with 1/4” pin hole for 1.5”, 2”, 2.5” Bore 322270 with 1/4” pin hole for 3”, 3.5”, 4” Bore 377271 with 3/8” pin hole for 5” Bore
Dimensional Data in Inches:
FILTRATION
BORE
A*
B
C
D
E
G
J
K
L
M N
R
S
1.5 2.0 2.5 3.0 3.5 4.0 5.0
7 0.1875 SAE 4 0.750 2.000 0.750 0.959 3.390 1.653 0.625 0.461 0.765 1.25 8 0.1875 SAE 8 1.125 2.500 1.125 1.508 2.992 1.339 0.750 0.709 1.015 1.50 8 0.1875 SAE 8 1.375 3.000 1.375 1.506 2.992 1.339 0.750 0.708 0.765 1.50 8 0.1875 SAE 8 1.500 3.500 1.500 1.549 2.992 1.339 0.709 0.708 1.015 2.00 8 0.1875 SAE 8 1.750 4.000 1.750 1.262 3.268 1.378 0.720 0.709 1.015 2.00 9 0.2500 SAE 8 2.000 4.625 2.000 1.683 3.543 1.535 1.024 0.709 1.265 2.25 12 0.2500 SAE 12 2.500 5.625 2.500 2.494 4.000 1.378 1.500 1.260 1.515 2.50
GAUGES & METERS
CONTROLS
A* - 2” spacer is added at 48” stroke, and an additional 1” spacer is added for each additional 6” stroke thereafter to a 6” max. spacer.
PART NO.
STROKE ROD DIA.
RETRACTED EXTENDED COLUMN LOAD PORT SIZE PIN DIA.
SHIP WT.
FLUID COOLERS
1.5” Bore
207371 207372 207373 207374 207375 207376 207377 207378 207380 207098 207381 207382 207383 207384 207385 207386 207387 207388 207389 207390 207391 207393 207394 207396 207397 207099
4 6 8
0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75
11 13 15 17 19 21 23 25 31 12 14 16 18 20 22 24 26 28 32 38 44 48 58 72
15 19 23 27 31 35 39 43 55 16 20 24 28 32 36 40 44 48 56 68 80 88
5,300 5,300 5,300 5,110 3,860 3,020 2,430 1,990 1,210 9,420 9,420 9,420 9,420 9,420 9,420 9,420 9,420 7,930 6,750 5,810 3,500 2,830 1,610 1,030
SAE 4 SAE 4 SAE 4 SAE 4 SAE 4 SAE 4 SAE 4 SAE 4 SAE 4 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8
0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75
7 7 9
HOSES & FITTINGS
10 12 14 16 18 24
10 10 10 13 13 14 10 14 13 16 17 17 20 21 22 26 31 33 42 52 1
COMPONENTS
Seal Kit
Includes lock wire - 207143
2” Bore
BEARINGS & BUSHINGS
4 6 8
1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
10 12 14 16 18 20 24 30 36 40 48 60
MOBILE PRODUCTS
CUSTOM SOLUTIONS
24.81
106 132
Seal Kit
1.125 Includes lock wire - 207144
1
30
Made with FlippingBook flipbook maker