CYLINDER COMPONENTS
Bailey offers the highest quality cylinder seal kits, weld-on ports, replacement pins, clips, clevises, base ends and other hydraulic cylinder components to keep the hydraulics on your equipment functioning properly.
3/8” spanner holes (two at 180 deg. apart on bores 2” through 5”, four at 90 deg. on bores 6 through 8”) CHIEF™ GLAND RETAINER RINGS (300 SERIES)
PART NO.
BORE SET SCREW A
B
D THREAD LENGTH (G)
THREAD SIZE MATERIAL
780332 780335 780337 780338 780340
2.5 4.0 5.0 6.0 8.0
1/4-20 1/4-20 1/4-20 1/4-20 1/4-20
2.125 1.375 3.375 3.625 1.625 5.000 4.000 1.625 6.000 5.250 1.750 7.250 7.060 2.250 9.910
0.750 0.750 0.750 0.875 1.500
2.875-16 4.500-12 5.500-12 6.500-12 8.750-12
DOM-1026 DOM-1026 DOM-1026 DOM-1026 DOM-1026
CHIEF™ BASE PLATES
Replacement plates for Chief™ WC, WP, WT, and WX models 1.5” to 4” bores. Roll pin hole is used during manufacturing.
ROLL PIN HOLE DIA.
PART NO.
BORE
A
B
C
MATERIAL
3000 PSI Series
780141 780136 780137 780138 780139 780140
1.5 2.0 2.5 3.0 3.5 4.0
1.875 2.375 2.875 3.375 3.875 4.500
0.430 0.430 0.500 0.560 0.625 0.750
0.125 0.125 0.125 0.125 0.125 0.185
0.250 0.250 0.250 0.250 0.250 0.250
AISI 1030 AISI 1030 AISI 1030 AISI 1030 AISI 1030 AISI 1030
4000 PSI Series
780056 780058 780060
5.0 6.0 8.0
5.50 6.50 8.75
1.000 1.125 1.500
0.25 0.25 0.50
- - -
C-1080 STEEL C-1080 STEEL C-1080 STEEL
46
Made with FlippingBook flipbook maker