CYLINDER COMPONENTS
BREATHER VENTS
CYLINDERS
CYLINDER COMPONENTS
PART NO.
MICRON
THREAD SIZE
Enhanced Brass Breather Vent
JACKS
Enhanced design with solid top. More resisteant to moisture and dirt. Often used on single acting cylinders or valves, gear boxes, crank cases, storage tanks or other similar applications.
237259
10-12
SAE 8
VALVES
Nickel-Plated Iron Breather Vents
237261 237262 237263 237264 237265
40 40 40 40 40
1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT
MOTORS
Brass Breather Vents
PUMPS
Often used on single acting cylinders or valves to prevent dirt and foreign particles from entering ports open to the atmosphere. Also used for vacuum pressure equalization for gear boxes, crank cases, storage tanks or other similar applications
237250 237251 237252 237253 237254 237266 237256 237257 237258
40 40 40 40 40 40 40 40 40
1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT SAE 4 SAE 6 SAE 8 SAE 12
ENGINES
POWER UNITS
FILTRATION
GAUGES & METERS
CONTROLS
FLUID COOLERS
STROKE CONTROLS
HOSES & FITTINGS
STROKE ADJUSTER
STROKE CONTROLS
PART NO.
FEMALE THREAD
MALE THREAD
COMPONENTS
Stroke Adjuster - Externally Mounted
Fits threaded rods with 1.25” male threads. Thread the Adjuster onto the rod to decrease the stroke. Adjustment range is approximately 1”.
BEARINGS & BUSHINGS
277321
1 1/4”
2 1/4”
PART NO.
FITS ROD
INCLUDES SEGMENT SIZES
Stroke Controls - Externally Mounted
MOBILE PRODUCTS
Clamps to the exterior of the rod to reduce the amount of retraction by the depth of the stroke control segment size used. Each part # comes with 4 segments of different sizes. (this also increases your fully retracted length – center of pin hole to center of pin hole)
237072 237071 237068 237073
3/4” TO 1”
0.75”, 1”, 1.25”, 1.5” 3/4”, 1”, 1 1/4”, 1 1/2” 1”, 1 1/2”, 2”, 4 1/4”
CUSTOM SOLUTIONS
1 1/8”, 1 1/4”, 1 3/8”, 1 1/2”
1 3/4”, 1 7/8” 1 3/4” TO 2”
1”, 1.5”, 2”, 4”
For pricing, please refer to our website at Baileyhydraulics.com or call one of our Customer Experience Specialists at 1-800-800-1810.
50
Made with FlippingBook flipbook maker