HYDRAULIC VALVES
DIRECTIONAL CONTROL VALVES
CYLINDERS
CHIEF™ - Fine Metering Spools - 13 GPM
TANDEM CENTER - used for double acting cylinders work ports blocked in neutral FLOAT POSITION - when in the float detent, work ports are open to tank to allow cylinder to “float”
CYLINDER COMPONENTS
• 13 GPM - 3625 PSI • Adjustable relief range 2250-3625 PSI (factory set at 2500 PSI) • Cast Iron Construction • Precisely machined hydraulic channels provide improved throughput and metering PART NO. GPM PSI NO. OF SPOOLS TYPE
• No load check • 4th position float
JACKS
SPOOL
PORT SIZE
SHIP WT.
VALVES
ACTION
IN/OUT WORK
4-way 4 pos tandem center with 4th pos. float 4-way 4 pos tandem center with 4th pos. float 4-way 4 pos tandem center with 4th pos. float
fine metering spring center to neutral with 4th pos. float detent fine metering spring center to neutral with 4th pos. float detent fine metering spring center to neutral with 4th pos. float detent
220871
13
3625
1
SAE 10 SAE 8
7
MOTORS
220872
13
3625
2
SAE 10 SAE 8
12
PUMPS
220873
13
3625
3
SAE 10 SAE 8
17
Accessories – see PG 62 Chief G Series 10 GPM for Detent Kit, Closed Center Plug & Power Beyond Plug.
ENGINES
CHIEF™ P70 - Tandem Metering (Brand Valve Replacements) • Flow Range from 0-18 GPM - 3000 PSI • Pressure compensation along with fine metering allows precise control over the speed of the actuator, regardless of the load
POWER UNITS
• 1 Spool - Precision ground chromium plated spool assures long life • Full range pressure compensated by-pass type flow control valve built in PART NO. GPM NO. OF SPOOLS TYPE SPOOL
• Adjustable pilot operated relief • Fine metering in either direction
FILTRATION
PORT SIZE
SHIP WT.
ACTION
IN/OUT WORK 3/4 NPT 1/2 NPT 3/4 NPT 1/2 NPT SAE 12 SAE 10 3/4 NPT 1/2 NPT
GAUGES & METERS
220790 220791 220792 220789
0-6 0-12 0-12 0-18
1 1 1 1
4-way 3 pos. fine metering 4-way 3 pos. tandem metering 4-way 3 pos. tandem metering 4-way 3 pos. tandem metering
spring center to neutral spring center to neutral spring center to neutral
7 6 6 6
friction detent
CONTROLS
BAILEY™ - Directional Control Valve With Microswitch - 12 GPM
• Normally open (NO) microswitch triggered to closed when valve is shifted from the neutral position • Mircoswitch has a female connector with a male end • Direct acting relief set at 2,175 PSI (150 bar), adjustable from 900 to 2900 PSI • Cast Iron construction, built in load check on spool • Relief cartridges available for 580-1150 psi or 2300-4600 PSI
FLUID COOLERS
HOSES & FITTINGS
PART NO.
NO. OF SPOOLS
PORT SIZE
GPM MAX PSI
TYPE
ACTION
VOLTAGE
SHIP WT.
COMPONENTS
spring center to neutral with normally open microswitch
12VDC at 10A or 24VDC at 3A
228958
12
4600
1
4-way, 3 pos.
SAE 8
6
BEARINGS & BUSHINGS
CHIEF™ - Directional Control Valve with Micro-switch - 10 GPM • 10 GPM - 3625 PSI • Cast Iron Construction • Relief setting at 1500 PSI • Good for systems that operate with a battery
MOBILE PRODUCTS
• Micro-switch affixed to end that allows valve to trigger micro-switch when it is shifted from neutral and release when shifted back to neutral • Load check
CUSTOM SOLUTIONS
SPOOL
PORT SIZE
PART NO.
NO. OF SPOOLS
GPM
SHIP WT.
TYPE
ACTION
IN/OUT WORK
spring center to neutral with micro- switch
220899
10
1
4-way 3 pos. tandem center
SAE 10 SAE 8
7
64
Made with FlippingBook flipbook maker