HYDRAULIC CYLINDERS
Designed to perform in the Agricultural industry as well as other industries. Thoroughly tested to our standards for quality and performance. • Intended Use: Double-acting applications • Temp: -40 ° F to 230 ° F • Piston: Ductile iron ASTM A536 65-45-12 • Gland: Ductile iron, drilled oil passages - ASTM A536 65-45-12 • Tube: Precision honed steel • Rod: Hard chrome plated • End Mounts: Ductile iron female clevises with pins and clips included • Tube Seals: Buna O-ring • Rod Seal: Deep polypak with B lip design • Rod Wiper: Urethane, snap-in • Piston Seal: Hallite 755 prolonged wear resistance with wear ring • Painted Black • 1 year limited warranty BAILEY’S MAXIM CYLINDER WITH CLEVIS MOUNTS MAXIM™ TC TIE-ROD CYLINDERS - 2500 PSI
CYLINDERS
CYLINDER COMPONENTS
JACKS
VALVES
Note: 1.14” length of thread on rod end (no room to adjust). 3.15” length of thread for 8” and 16” ASAE (do not adjust below 1.625 length of the end)
MOTORS
PUMPS
ENGINES
POWER UNITS
FILTRATION
Dimensional Data in Inches:
BORE A* S T V W 2.00 10.25 0.189 3/8 NPT 2.50 2.50 1.165 1.165 2.125 2.0 0.394 1 1/8-12 UNF 1.0 2.00 2.00 2.875 2.835 2.50 10.25 0.189 3/8 NPT 2.50 2.50 1.165 1.165 2.125 2.0 0.394 1 1/8-12 UNF 1.0 2.00 2.00 3.385 3.150 3.00 10.25 0.189 1/2 NPT 2.56 2.72 1.165 1.165 2.125 2.0 0.472 1 1/4-12 UNF 1.0 2.00 2.27 4.020 3.780 3.50 10.25 0.218 1/2 NPT 2.56 2.72 1.165 1.165 2.125 2.0 0.551 1 1/4-12 UNF 1.0 2.27 2.27 4.500 4.250 4.00 10.25 0.244 1/2 NPT 2.76 2.72 1.165 1.165 2.125 2.0 0.630 1 1/4-12 UNF 1.0 2.27 2.27 5.080 4.920 B C E G H I J M P Q R**
GAUGES & METERS
CONTROLS
FLUID COOLERS
A* 12.25” for 8” stroke ASAE cylinders and 15.50” for 16” stroke ASAE cylinders. R** Pin Diameter: 1.25 for 16” stroke ASAE cylinders from 3” to 4” bore.
HOSES & FITTINGS
COLUMN LOAD
PIN DIA.
PART NO.
STROKE
ROD DIA.
RETRACTED EXTENDED
PORT SIZE
SHIP WT.
2” Bore
COMPONENTS
218297 218298 218299 218300 218306 218307 218308 218309 218358 218310 218311 218312 218313 218314 218315 204500
4 6 8
1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125
14.25 16.25 18.25 20.25 20.25 22.25 24.25 26.25 31.50 28.25 30.25 34.25 40.25 46.25 58.25
18.25 22.25 26.25 28.25 30.25 34.25 38.25 42.25 47.50 46.25 50.25 58.25 70.25 82.25 106.25
7,850 7,850 7,850 7,850 7,850 7,850 7,850 7,850 7,850 7,850 6,950 5,180 3,570 2,610 1,570
3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
14 16 17 18 19 21 22 24 24 25 26 29 34 38 50
8 ASAE
BEARINGS & BUSHINGS
10 12 14 16 18 20 24 30 36 48
16 ASAE
MOBILE PRODUCTS
CUSTOM SOLUTIONS
Seal Kit
For pricing, please refer to our website at Baileyhydraulics.com or call one of our Customer Experience Specialists at 1-800-800-1810.
8
Made with FlippingBook flipbook maker