Safety training
Control of Hazardous Energies Standard / V5 DRAFT REVIEW - Oct 2025
5.4 Duration of the CoHE Modules
The total contact time for completing each module within the CoHE Training Standard as standalone training is given in the module timetables and summarised in table 5.4.1 below.
The training provider must not exceed the time per day given in table 5.4.2 below.
Modules
Duration
CoHE Electrical Safety Module
8 hours
CoHE Pressure Fluid Safety Module
5 hours 30 mins
Table 5.4.1 – Duration of CoHE Modules
Maximum Duration Per Day
Contact time
8 hours
Total training day
10 hours
Table 5.4.2 – Maximum durations for training days
Contact time includes delivery of course lesson content, practical exercises and activities directly related to these.
Note
The total training day includes contact time, meals and breaks and travel between training sites (where applicable).
5.5 Validity Period
The GWO CoHE Training Standard modules are valid for the period stated in the table 5.5.1 below.
Training records shall be renewed before the end of a given validity period. A training record can be renewed up to two months prior to expiry and maintain the original certification date by uploading the previous training record’s valid until date in WINDA. If a training record is renewed outside of two months of expiry, it must carry the new date of certification. The validity period is automatically calculated in WINDA by entering the course completion date.
Course/module
Training Record Validity (Months)
CoHE Electrical Safety Module
24
CoHE Pressure Fluid Safety Module
24
Table 5.5.1 – GWO CoHE validity periods
Global Wind Organisation ©2025 / www.globalwindsafety.org
13 / 79
Made with FlippingBook - Share PDF online