Safety training
Control of Hazardous Energies Standard / V5 DRAFT REVIEW - Oct 2025
LESSON 3 - ELECTRICALLY SAFE WORKING CONDITIONS
100 min.
The aim of this lesson is to enable the participants to determine when and how to establish an electrically safe work condition for themselves and other team members to perform work tasks safely in the vicinity of electricity in the wind industry.
After successfully completing this lesson of the Electrical Safety Module, the participants can:
18) Act independently in determining when and how to establish an electrically safe work condition (Ability, intermediate level)
ELEMENT 3.1 - ELECTRICAL SAFE WORKING PRACTICES & PPE
Learning objectives:
19) The participants perform a correct pre-use inspection of the required electrical PPE for a given task defined as electrical work in the wind industry (Skills, intermediate level)
20) The participants act independently in selecting and using electrical safe working practices to reduce the risk of injury related to working around electricity and performing electrical work in a WTG environment (Ability, intermediate level)
The instructor shall:
Facilitate a learning activity such as group discussions about:
a. the importance of using the electrical safe working practices in the participants´ work
b. the participants responsibility in ensuring that work is always performed in accordance with the electrical working practices
c. examples of actions to take when there is a lack of electrical safe working practices in place for electrical work.
Engage the participants in sharing experiences of how to perform electrical work tasks safely using electrical safe working practices including:
a.
Electrical PPE
b. Exposed energised electrical conductors and circuit parts
c.
Approach boundaries
Global Wind Organisation ©2025 / www.globalwindsafety.org
29 / 79
Made with FlippingBook - Share PDF online