BRAHM TM BC Central Collector Series
I NSTALLATION
The BRAHM™ Collector requires some minor assembly. A standard unit will come with an exhaust cover pre-installed.
In some instances, filters may be shipped separate from the unit, requiring installation on site. See the 'BRAHM™ Collector Accessories User Manual' for accessory assembly instructions. General Installation Guidelines Clean Air Industries BRAHM™ Collectors are shipped via freight and generally arrive on a flat bed trailer or box trailer. The units are typically palletized. Use a fork lift truck driven by a qualified individual, to remove the unit and other pallets from the truck. Occasionally, fork extensions are helpful. Once the unit is inside the facility, ready to be unpackaged, please proceed cautiously. Banding
straps, cardboard, and plastic wrap must be removed. BRAHM™ Collectors are heavy and tend to be irregularly weighted. The motor and the majority of the metal are located on the motor / valve side of the unit. This can make transporting the units hard to handle. Please see the "Unit Weight" section for proper weights. Multi-modular units require assembly on site. Specifically, the BC36 and larger units are shipped on separate pallets which require bolted assembly on site. There are (4) steel plate eyelets vertical on the top of unit or
section. These are the lifting lugs, and can be used for moving the unit around. There are multiple 6” feet located on the bottom corners of the unit or unit half.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker