on
BRAHM TM BC Central Collector Series
W ARNINGS AND L ABELS
HIGH VOLTAGE: The voltage of the BRAHM dangerous once connected to a power supply. Incorrect installation may cause damage to the equipment, serious injury, or death. Consequently, it is essential to comply with instructions in this manual, local and national safety rules, and follow all safety procedures including proper lock out and tag out procedures. BRAHM™ Collector is anual, local and national safety rules, and
ELECTRICAL SHOCK HAZARD: The Variable Frequency Drive (VFD) uses large capacitors which can hold a charge long after the power has been disconnected not service the panel until the VFD has fully discharged. ed from the unit. Do
GROUND CONNECTION: Proper grounding of the equipment and electrical panel is essential. Do not attempt to operate the equipment without electrically grounding the panel. The connection to the earth ground must be proper and provide a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. COMPRESSED AIR: Compressed air is used in the operation of this unit. Follow proper lock out / tag out procedure servicing the unit. This includes draining the compressed air reservoir inside the unit. Failing to do so can lead to injury or hearing loss. Look out – drain tank – do not service while pressurized. do not service while pressurized. must be proper and provide a path to the earth to prevent hazardous this unit. Follow proper lock out / tag out procedures prior to
0
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker