on
BRAHM TM BC Central Collector Series
C ONSTRUCTION OF THE Unit stands are optional and must be purchased separately. Dimensional and exploded view drawings are available for the different versions of the unit stands (NOTE: See stand specific drawings in Appendix D and Appendix E). stands are assembled in the field and are kitted with the parts grouped together. Bolt packages are included with each stand kit. All bolts are Grade 8, zinc 3/8"-16 x 1" bolts with flat washers, and lock nuts. Using (16) 3/8" Bolts, Nuts, and Flat Washers, assemble the Horizontal Channels to the Leg Weldments. Make sure to put washers on each side of parts being fastened together. Using (8) 3/8" Bolts, Nuts, and Flat Washers, assemble the Cross Braces to the Leg Weldments / Side Assemblies. Make sure to put washers on each side of parts being fastened together. Make sure to place one brace on the inside, and one on the outside. Using (16) 3/8" Bolts, Nuts, and Flat Washers, assemble the Horizontal Channels to the Side Assemblies. Make sure to put washers on each side of parts being fastened together. Side Assemblies. Make sure to put All mbled in the field and are kitted with the parts grouped together. Bolt packages are included with each stand kit. All bolts are Grade 8, zinc-plated 16 x 1" bolts with flat washers, and lock nuts. Weldments / Side Assemblies. Make sure to put
O PTIONAL S TANDS
Using (8) 3/8" Bolts, Nuts, and Flat Washers, assemble the Cross Braces to the Leg Weldments / Side Assemblies. Make sure to put washers on each side of parts being f to place one brace on the inside, and one on the outside. Using (4) 1/2" Anchor Bolts, anchor the stand to the concrete pad / floor. Holes will need to be drilled into the concrete prior to driving the concrete anchors (not supp (Recommended) For ALL units, it is recommended that the dust tray and hopper be installed washers on each side of parts being fastened together. Make sure ) 1/2" Anchor Bolts, anchor the stand to the concrete pad / floor. Holes will need to be drilled into the concrete prior to driving the concrete anchors (not supplied). (One at each leg.) units, it is recommended that the dust tray and hopper be installed . (One at each leg.)
onto the unit before the unit is placed on the stand. For multi-module units, repeat for each module. S ETTING THE B RAHM ™ C OLLECTORON THE NOTE: module units, repeat for each module.
O PTIONAL S TAND
Please see the "Moving the Brahm™ Collector" section prior to setting the unit on the stand.
0
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker