Clean Air Industries Brahm Collector Series User Manual

BRAHM TM BC Central Collector Series

G ETTING S TARTED After the unit has been installed at its final place and the electrical and compressed air line has been connected, the unit needs to be tested to make sure that all the features run as intended. This step is usually done by Clean Air Industries installation team. Here is a quick guide to test the system and get familiar with the unit  The first thing to do is to rotate the Power Disconnect to ON position to turn on the unit. Then, press the green button to start the blower and red button to stop the blower. Refer to page 61 for more details..  All Brahm Collectors are equipped with Smart Pulsing System. On auto mode, the unit will automatically pulse to self-clean the filter. Refer to page 72 for more details..  (Optional) When the unit is equipped with Variable Frequency Drive, the unit will adjust its motor speed automatically based on the condition of the filter. The speed can also be adjusted manually from the VFD. Refer to page 78 for more details about this.. Or page 87 on units equipped with Synapse Panel (Touch Screen HMI)..  (Optional) When Fire Suppression System is equipped, the unit will have louvers on the inlet and exhaust side. During fire, the motors will stop and the louvers will automatically close to contain and suppress the fire in the unit. There is a 20 s delay for the fire canisters between each module (on multi module units like BC24, BC36, BC54, etc..) to allow the louver to close and prevent voltage spike to trip the circuit breaker. Remember, DO NOT rotate the Power Disconnect into OFF position as this will cut power and thus deactivate the Fire Suppression System. Refer to page 26 for more details.. Important!!! On units with Fire Suppression System, the fire solenoid is in disconnected position when the unit leaves Clean Air Industries facility. This allows for the FSS to be tested onsite without actually actuating the fire canister. Check in the junction box to make sure that it is connected when the unit is ready!

sales@clean-air.com

clean-air.com

1-866-665-1829

Made with FlippingBook Online newsletter maker