BRAHM TM BC Central Collector Series
Slide the bolt into the front right hole in the corner of the hopper with the threaded shaft upward. Making sure the holes are aligned, begin to screw the bolt into the hole part way. Repeat this bolt installation with the bolt hole in the opposite corner. Make sure to leave the bolts loose to allow installation of the remaining bolts. Repeat this bolt installation with the remaining bolt holes. Make sure to leave the bolts loose during this process to allow installation of the remaining bolts. Once all the bolts have been loosely installed, use a ratchet or wrench to tighten the bolts down and compress the gasket. Work around the hopper to make sure all bolts have been properly tightened. Make sure upon completion that the blast gate on the bottom of the hopper is closed.
Hoppers, if purchased, are installed by the end-user after delivery.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker