BRAHM TM BC Central Collector Series
terminated in the junction box using the split bolt connectors. Connect the incoming power to the electrical panel. First make the ground connection into the grounding terminal block. The incoming power wires must be terminated on the incoming side of the power disconnect switch (L1, L2, L3). Primary branch circuit protection must be provided by the end user. The breaker must have an IC trip rating of 30kA. Please see the following chart for recommended breaker size. A wiring diagram for the Brahm™ Collector is provided in Appendix B. The full load amperage varies depending on the unit configuration. Please the following chart for motor and unit full load amperage ratings (FLA).Power must be connected to the control distribution box inside the unit. Conduit must be run from the electrical panel to the unit. Inside the unit, there is a black junction box. Run the 16 Ga wires provided through the conduit into
the junction box, and terminate the wires on the terminal strip as directed in the electrical diagram.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker