BRAHM TM BC Central Collector Series
M AINTENANCE D UST T RAY M AINTENANCE
NOTE:
Dust trays are an optional accessory and are not used for all operations. Dust trays will not be used if hoppers and dust bins are used.
If purchased, there is one dust tray there are for each BRAHM™ Collector. These dust trays are located underneath the unit below the filter compartment. As the self-cleaning cycle is activated, dust will be blown from the filters and accumulate in the dust tray(s). The BRAHM™ Collector dust trays should be inspected and cleaned periodically. The dust trays will acquire dust and debris and require being emptied regularly. The waste should be disposed of in accordance with local environmental regulations. The inspection and cleaning interval depends on the amount and type of particulate generated in your specific application. Variables can
greatly influence the amount of particulate being deposited on the filters and, in turn, the dust trays. Initially, it is recommended that inspection of the dust trays be performed every two to four weeks on each machine. This will give you an idea of how much particulate is falling into the trays, and how often they should be emptied. Most industrial facilities empty their dust trays every month to six weeks. To check and empty the dust trays, simply remove both bolts holding the dust tray door into the dust tray
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker