BRAHM TM BC Central Collector Series
Initially, you should take readings on a weekly basis, or at any point where the smoke plume is visibly not being removed from the work area. This data will be used to predict the time to change the filters, or adjust the preset levels. Remember, no two applications are exactly alike. Because of this your own experience will be needed to optimize filtration, and minimize filter replacement costs. Once you have verified that the BRAHM™ Collector is picking up the fumes or smoke, look at the duct pick up spark baffles. These baffles should be washed when they become visibly dirty / contaminated. If the unit begins auto pulsing at 7.0 in. H 2 O and the smoke is still being drawn in at an acceptable level, the setting could be increased to a higher number. The correct number is based on trial and error. The process for determining your specific filter change interval is based on many variables. Please feel free to establish a filter change interval that meets you application and desired performance results. By properly monitoring the filters you will reduce filter costs and improve the efficiency of the units. Proper filter cartridge replacement is important to optimal performance of the BRAHM™ Collector.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker