BRAHM TM BC Central Collector Series
Option Mode: Run Pls delP “Run Pulse Limit” - This option sets the pressure differential at which the running pulse sequence will be activated in Automatic Mode (see Auto Mode: Above). This pulsing state is referred to as the online cleaning cycle. To change the value, press the ‘OK’ button. The number of pressure value will begin to flash. Use the ‘+’ and ‘-’ buttons to increase and decrease the amount of cycles respectively. Press the ‘OK’ button again to set the counter value. Option Mode: Alarm delP “Alarm Limit” - This option sets the pressure differential at which the filter cleaning alarm will be activated in Automatic Mode (see Auto Mode: Above). To change the value, press the ‘OK’ button. The number of pressure value will begin to flash. Use the ‘+’ and ‘-’ buttons to increase and decrease the amount of cycles respectively. Press the ‘OK’ button again to set the counter value. Option Defaults The Clean Air Brahm™ Collector will arrive preprogrammed with no necessary adjustments needed. The Option Modes allow for the changing of some variables, which may extend filter life or increase performance on non-standard applications. If the settings are changed, the defaults are as follows: Option Mode: ShutDown Pls #: 05 Option Mode: Shutdwn delP: 3.0 Option Mode: Run Pls delP: 7.0 Option Mode: Alarm delP: 9.9 Optional Variable Frequency Drive (VFD) A Variable Frequency Drive (VFD) can be ordered to operate the motors in place of the contactors and overload. This device operates by varying the frequency used to drive the motor; this causes the motor to run at a slower speed and shifts the blower curve. By bringing in the pressure from a differential pressure sensor, the speed of the drive is correlated to the filter loading.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker