I NSTALLATION
The Liberty Weldcell requires some minor assembly.
A standard unit will come with an exhaust cover pre-installed.
In some instances, filters may be shipped separate from the unit, requiring installation on site.
See the 'Liberty Weldcell Accessories User Manual' for accessory assembly instructions.
General Installation Guidelines
Clean Air America’s Liberty Weldcells are shipped via freight and generally arrive on a flat bed trailer or
box trailer. The units are typically palletized. Use a fork lift truck driven by a qualified individual, to remove
the unit and other pallets from the truck. Occasionally, fork extensions are helpful.
Once the unit is inside the facility, ready to be unpackaged, please proceed cautiously. Banding
straps, cardboard, and plastic wrap must be removed.
Liberty Weldcells are heavy and tend to be irregularly weighted. The motor and the majority of the
metal are located at the bottom of the unit. Please see the "Unit Weight" section for proper weights.
There are (4) steel plate eyelets vertical on the top of unit or section. These are the lifting lugs and
can be used for moving the unit around. There is multiple 3 ” feet lo cated on the bottom of the unit.
Copyright © Clean Air Industries , Inc.
Liberty WeldCell User Manual, August 2023
Page 11 of 66
Made with FlippingBook - PDF hosting