online cleaning cycle. To change the value, press the ‘OK’ button. The number of pressure value will
begin to flash. Use the ‘+’ and ‘ - ’ buttons to increase and decrease the amount of cycles respectively.
Press the ‘OK’ button again to set the counter value.
O PTION M ODE : A LARM DEL P
“Alarm Limit” - This option sets the pressure differential at which the filter cleaning alarm will be
activated in Automa tic Mode (see Auto Mode: Above). To change the value, press the ‘OK’ button.
The number of pressure value will begin to flash. Use the ‘+’ and ‘ - ’ buttons to increase and decrease
the amount of cycles respectively. Press the ‘OK’ button again to set the co unter value.
O PTION M ODE : S LEEP T IME
“Sleep Time” - This option sets the length of time for the sleep function of the Economizer. To change
the value, press the ‘OK’ button. The number of pressure value will begin to flash. Use the ‘+’ and ‘ - ’
buttons to increase and decrease the amount of cycles respectively. Press the ‘OK’ button again to
set the counter value.
O PTION M ODE : M OTOR
This option sets whether the unit(motor) runs manually or automatically. To change the mode of the
motor, release t he ‘B’ button and press ‘+’ or ‘ - ‘ to switch to manual or automatic. Setting the motor to
automatic enables the Economizer function. Setting the motor to manual disables the Economizer
function
Copyright © Clean Air Industries , Inc.
Liberty WeldCell User Manual, August 2023
Page 43 of 66
Made with FlippingBook - PDF hosting