HMI:
Clean Air Industries Liberty Weldcell EVO TM has a built-in remote HMI feature. This feature provides user the ability to access a Remote HMI screen via mobile phone or tablet to monitor and modify the
settings parameters of the unit remotely. This feature can be activated by connecting the data port
provided to the building system using an Ethernet cable.
The remote screen can be accessed by downloading the CMT
Viewer App from App Store for iOS users or Google Play Store
for Android users.
Open the App and click the “+” button at the top right of the screen, as shown below.
The user needs to be on the same
network as the Unit, i.e. same Wi-Fi
network to be able to access the unit.
The available devices in the network
are often automatically detected by the
app. If no device is detected, enter the
IP address of the unit. The IP address
of the unit can be found by holding ”UP”
and “Down” button of control panel
found on the unit. Enter the password. The default password of Clean Air Industries Liberty Weldcell EVO TM is 111111. If multiple units are available within the same network, the user can view multiple screens at the same time to
easily monitor the units.
Copyright © Clean Air Industries , Inc.
Liberty WeldCell User Manual, August 2023
Page 45 of 66
Made with FlippingBook - PDF hosting