Pulse Settings Screen
20: This window displays the current pulsing mode, whether it’s count, time, Vtest or auto mode. 21: The Up and Down button navigates between mode to make changes on the pulsing mode. 22: The start pulse and stop pulse buttons are used to start and stop the pulsing. 23: The drop down window displays the options mode.
Email Screen
24: The (+) button is used to add a user email contact to the contact list. 25: This is the email contact list currently stored in the unit
26: This is the list of emails that will get email alerts
27: The << and >> buttons are used to add/remove email addresses from the right “Current Group” box
Fire Screen
28: Smoke Detector Indicator lights up when the smoke detector is triggered 29: Heat Detector1 Indicator lights up when the heat detector1 is triggered 30: Heat Detector2 Indicator lights up when the heat detector2 is triggered 31: Fire Pull Indicator lights up when the fire pull is triggered 32: Fire Bottle Indicator lights up when the fire bottle is triggered and stays ON until it is reset either by pressing the “FSS Reset” button or “A”,”B”, and “OK”
simultaneously
33: FSS Reset button resets the indicator, including the fire bottle indicator
Copyright © Clean Air Industries , Inc.
Liberty WeldCell User Manual, August 2023
Page 49 of 66
Made with FlippingBook - PDF hosting