B RINGING THE M AIN U NIT U PRIGHT , W ITH L IFTING T OOL
NOTE:
Please be sure the chain hoist, come along, or chain/cable, is rated for
that amount of weight to be lifted.
Properly sized chain or cable can be attached to a
lifting tool on a fork lift truck. The chain or cable can
then be connected to the lifting lugs of the unit. The
forklift truck can then be used to lift and raise the
unit.
Other methods include attaching a chain hoist or
come along, or both to the eyelets provided at the
top of the unit.
When the unit is being lifted, the bottom of the unit
may shift. If possible, brace the bottom of the unit to
prevent slipping.
A '2 x 4' brace is fastened to the front floor flanges
of the booth. This used during shipment to prevent
the collapse of the booth side walls. This '2 x 4'
should be kept in place while bringing the unit
upright to prevent damage.
SLOWLY hoist the unit up, supporting it whenever
and wherever possible.
DO NOT let the unit slam suddenly when bringing
the unit into the upright position. This can cause
damage to the unit.
Please proceed cautiously.
Copyright © Clean Air America, Inc.
Streamer User Manual, March 2015
Page 17 of 54
Made with FlippingBook - Online magazine maker