How to replace filters
NOTE:
It is important to ensure that the filter
gaskets seal correctly for proper
operation of the Streamer. This will
ensure that you do not get particulate
past the filter compartment. The easy
filter clamping system of the Streamer
helps with faster filter replacement and
maintenance.
1) Press the red 'STOP' button and allow blower to spin
down. This may take several minutes.
2) Rotate the Disconnect Switch / Emergency Stop Switch
to the '0' or 'OFF' position. This will disconnect power to
the unit to prevent the unit from being started during the
filter change. Please follow all lock out - tag out
procedures.
3) Shut off the compressed air supply to the Streamer.
4) Open the filter door by removing the door latches.
Please refer to the door latch section for details on how
to open/close the latches.
5) Swing the door open to allow access to the filter
compartment and reveal the cartridge filters.
6) Release the filters by pulling the cam lever toward you.
The cam lever is located at the top of the filters in the
center.
7) Once the cams have been released the filters are now
Copyright © Clean Air America, Inc.
Streamer User Manual, March 2015
Page 43 of 54
Made with FlippingBook - Online magazine maker