AntiWhip Brochure

24/7 Hydraulic Service

ANTIWHIP HOSE RESTRAINING SOLUTIONS

HIGH PERFORMANCE ANTIWHIP

With advanced fluid power systems becoming more powerful and complex, operator safety and hydraulic system protection has never been more important.

> Minimises the risk of injury and machine damage > Retro fit - no need to remove the hose to install

> Can be installed onto ANY hose > Breaking load of up to 15000N > Adaptable accessories

UK 0800 38 24 38 ROI 1800 74 78 35 www.pirtek.eu

#PirtekAntiWhipSolutions

Pirtek’s unique AntiWhip system minimizes the risk of injury and machine damage during catastrophic failures due to hose fitting blow off and accidental disconnection under pressure.

With the breaking load of up-to 15000N and the size range up to 2”, Pirtek AntiWhips cover a wide range of applications and loads promising you excellent safety for your hydraulic equipment. For your extra peace of mind, you can also include them in your annual maintenance and safety assessment plans. For more information, please speak to our qualified service technicians.

They can be installed onto any hose, with or without disconnecting from the port, making them the only unique solution available in the market for new installations and retrofitting the old fluid power systems. Thanks to their versatile range and adaptable accessories set, simple and quick installation, they are fit for every environment; leaving no more excuses to not put an AntiWhip on all pressurised hoses coming in contact with a person or critical equipment.

Hose OD 14-95mm

Break load capacity 900 - 1500kg

Length 300 - 450mm

Connection SAE/DIN

UK 0800 38 24 38 ROI 1800 74 78 35 www.pirtek.eu

BASIC INSTALLATION RULES

Set the wire rope AD (dynamic eyelet) on the hose, at a distance LT equal or higher than the LG ferrule length (and in any case not less than 80mm for hoses with outside diameter up to 38-40 mm and 120mm for larger external hose diameters). The LR dimension should be equal or higher than the LG ferrule length. Pull the two ropes ends and, at the same time, place the tensioner T close to the hose in order that the rope collar wraps around the hose itself. To increase the total length and consequently the efficiency of the rope grip, unscrew partially the G ferrule of the T tensioner. Repeat the operation to obtain a significant pre-charge of the collar, which will then assure tightness, irreversibility and stability. If, after the operation of point 3, a too larger space is found between the tensioner and the flexible hose, it is necessary to repeat the operation of point

1

2 getting the tensioner closer by acting on the locking rope grain. When in position, the safety rope will not move longitudinally on the hose. The connection to the adaptor/ equipment is made by using the proper F flange together with the two rope drive shells B assembled on the rope eyelets. Then close tight using the M8 bolt and the auto-sealing nut. In the same way, this set up can be repeated for the connection to 1 or 2 bolt of the SAE flange by means of proper washers / shells.

5

2

3

4

PIRTEK ANTIWHIP

1

2

3

4

5

UK 0800 38 24 38 ROI 1800 74 78 35 www.pirtek.eu

V2_1902010

Pirtek operate a number of centres. Please see a comprehensive list below.

Paisley 0141 849 0404 Park Royal 020 8961 0333 Perth 01738 635 555 Peterborough 01733 893 466 Plymouth 01752 511 010 Poole 01202 681 681 Portsmouth 02392 382 221 Preston 01772 620 111 Reading 01189 584 458 Rugby 01788 494 003 Redditch 01527 521 933 Sheffield 01142 493 666 Shropshire 01952 200 678 Slough 01753 550 077 Southampton 023 8033 7737 Stoke 01782 206 206 Swansea 01792 310 031 Swindon 01793 512 500 Thurrock 01708 869 696 Tyne & Wear 0191 487 9996 Wakefield 01924 365 300 Waterford 00353 5137 4000 Watford 01923 256 733 Westbury 01373 822 073 Wigan 01942 230 111 Wolverhampton 01902 862 000 Worcester 01905 757 111 York 01904 693 866

Guildford 01483 454 546 Harlow 01279 427 300 Hull 01482 217 222 Ipswich 01473 688 288 Isleworth 020 8847 5095 Isle Of Wight 01983 528 000 Kidderminster 01562 753 770 Kilmarnock 01563 521 166 Kings Cross 020 7700 1819 Leyton 020 8556 9500 Limerick 061 305569 Lincoln 01522 697 698 Liverpool 0151 933 9000 Luton 01582 597 050 Manchester East 0161 785 9100 Manchester 0161 877 0000 Mansfield 01623 555 500 Medway 01634 297 080 Milton Keynes 01908 565 500 Mitcham 020 8640 6565 Newport/Cardiff 01633 868 655 Northampton 01604 499 644 Norwich 01603 744 544 Nottingham 01159 850 081 Kinross 01577 865 855 Leeds 0113 244 2700 Leicester 01162 547 745

Aberdeen 01224 225 588 Ashford 01233 502 090 Basildon 01268 522 633 Belfast 02890 369 522 Birmingham 0121 327 8678 Bradford 01274 739 300 Bristol 01179 820 056 Burton Upon Trent 01283 545 666 Cambridge 01223 835 222 Cardiff 02922 679 926 Cleveland 01642 611 111 Cork 00353 21421 0990 Coventry 02476 633 797 Crawley 01293 571 707 Cumbria 01768 210 055 Derby 01332 205 000 Docklands 020 7474 8197 Doncaster 01302 881 115 Dublin 00353 1456 4822 Dundee 01382 819 988 Edinburgh 0131 554 1445 Ellesmere Port 0151 357 3574

Erith 01322 350 400 Exeter 01392 499 030 Falkirk 01324 611 444 Galway 00353 91 730 530 Glasgow 0141 641 4422 Gloucester 01452 881 861 Greenwich 020 7237 8230

Oldbury 0121 552 3355 Oxford 01865 711 323

Pirtek also operate a number of European centres.

Benelux +31 88 111 8888

Germany +49 221 945440

Sweden +46 77 033 04 00

24/7 Hydraulic Service

UK 0800 38 24 38 ROI 1800 74 78 35 www.pirtek.eu

24/7HydraulicService

Or download our FREE PIRTEK APP

Follow us on

Page 1 Page 2 Page 3 Page 4

Made with FlippingBook - Online Brochure Maker