Fluke 805 FC Vibration Meter Forget the pens, think meter
Recommended Accessories
The Fluke 805 FC is not a vibration pen; it’s a meter. A Fluke meter that eliminates the confusion of vibration screening and provides reliable measurements you can trust to make critical go or no-go maintenance decisions. With the Fluke 805 FC, you can identify the strength and severity of vibration and easily track the data over time to monitor an asset’s condition. • Innovative sensor design minimises measurement variations caused by device angle or contact pressure • Consistent data quality at both low and high frequency ranges • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition • Exportable data via USB • Trending in Microsoft ® Excel using pre-built templates • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz • Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud • Get authorisation to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live™ video call • Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements • Temperature measurement with Spot Infrared Sensor increases diagnostic capabilities • On-board memory holds and saves up to 3,500 measurements • Flashlight for viewing measurement locations in dark areas • One year warranty
Fluke 805ES External Assembly Vibration Sensor See page 164
Fluke 820-2 LED Stroboscope The Fluke 820-2 LED Stroboscope is a simple, easy to use tool to stop motion for measurement and diagnostic purposes. Investigate and observe potential mechanism failure with confidence on a variety of machinery, in a wide
Fluke 805 FC
range of industries, without making physical contact with the machine. The Fluke 820-2 LED Stroboscope is a rugged, compact, portable strobe with high intensity LED head, ideal for stop motion diagnostics, mechanical troubleshooting, and process or product research and development. • High intensity 7-LED array— 4,800 Lux @ 6,000 FPM/30cm • High efficiency LED solid-state light source with uniform flash characteristics allow for higher flash rates—30-300,000 FPM (flashes per minute) • Digital pulse width modulation for exceptionally sharp images at high speeds • Rugged, durable design utilises solid-state LEDs with no filaments, gases, hollow cavities, or glass • Quartz-accuracy control system provides high accuracy—0.02% (± 1 digit) • Multi-line LCD display • Check the rotating speed of machinery without physical contact or need for reflective tape
Specifications Vibration meter
Low frequency range (overall measurement) High frequency range (CF+ measurement)
10 Hz to 1,000 Hz
4,000 Hz to 20,000 Hz
Severity levels Vibration limit A/D converter
Good, Satisfactory, Unsatisfactory, Unacceptable
50 g peak (100 g peak-peak)
16-bit 80 dB
Signal to noise ratio
Sampling rate
Low frequency: 20,000 Hz; high frequency: 80,000 Hz
Real time clock backup
Coin battery
Sensor
Sensitivity
100 mV / g ± 10%
Measurement range Low frequency range (overall measurement) High frequency range (CF+ measurement)
0.01 g to 50 g
10 Hz to 1,000 Hz
4,000 Hz to 20,000 Hz
Resolution Accuracy Acceleration
0.01 g
At 100 Hz ± 5 % of measured value
Amplitude units
g, m/sec 2
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared thermometer (temperature measurement)
Range
-20 °C to 200 °C
Included Accessories
Accuracy
±2 °C
USB Cable, Storage Case, Belt Holster, Quick Reference Guide, CD-ROM (includes MS Excel Template and Documentation) and two AA Batteries.
Focal length
Fixed, at ~3.8 cm
External sensor (Fluke supports, but doesn’t provide, external sensors)
Frequency range 10 Hz to 1,000 Hz Bias voltage (to supply power) 20 V DC to 22 V DC Bias Current (to supply power) Maximum 5 mA
Ordering Information
Firmware
External interfaces
USB 2.0 (full speed) communication Database on internal flash memory
Data capacity
FLUKE-805FC
Fluke Connect ® Vibration Meter External Vibration Sensor for 805 Vibration Meter LED Stroboscope
Memory IP rating Drop test
Up to 3,500 measurements
Environmental
IP54
FLUKE 805ES
1 metre
General specifications
Battery type Battery life
AA (2) Alkaline or Lithium-ion 2 V DC
250 measurements
FLK-820-2
Size (LxWxH) and Weight
25.72 cm x 16.19 cm x 9.84 cm, 1.16 kg USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)
Connectors
C ontact your local distributor for price and availability. www.fluke.com/au/wtb
130
Mechanical Maintenance
Made with FlippingBook Learn more on our blog