Fluke 830 Laser Shaft Alignment Tool
Recommended Accessories
The ideal test tool to precision-align rotating shafts in your facility. The Fluke 830 Laser Shaft Alignment tool is easy-to-use, giving you fast, accurate and actionable answers that will keep your plant up and running. When it comes to laser shaft alignment, data is good but answers are better. Unlike using the straightedge method or dial indicators the Fluke 830 performs the complicated alignment calculations for you, meaning you’ll have the answers you need to quickly align your machine and get your plant up and running fast. An enhanced user interface provides easy to understand results that don’t require extensive alignment knowledge and the unique “All-in-One” result screen that shows you both coupling results and feet corrections (vertical and horizontal) in real terms making it easy to take corrective action. Since machine downtime is costly, test repeatability is critical.
FLUKE-830/MAGNET Compact magnetic sensor/ prism mounting bracket See Page 164
Recommended Kits Buy more, Save more
Fluke 830
Evaluate Alignment in 3 Simple Steps Fluke 830/SHIMS Precision Alignment Kit For more details see page 164
• Single laser measurement technology means reduced errors from backlash resulting in better data accuracy • Intuitive guided user interface quickly and easily complete machine alignments • Compass measurement mode enables flexible, reliable and repeatable measurements using an activated electronic inclinometer • Dynamic machine tolerance check provides continuous evaluation of alignment adjustments so you know when your machine in acceptable range • Unique extend mode handles gross misalignment by virtually increasing laser detector size • Data protection ensures your data is there when you need it with auto save and resume capability • Two year warranty
1. Set-up
Computer CPU
Intel XScale PXA270 running at 312 MHz
Memory
64 MB RAM, 64 MB flash
Type: TFT, transmissive (sunlight-readable), 65,535 colours, backlit LED Integrated light sensor for automated adjustment of the brightness to the display according to the lighting conditions which extends battery life Keyboard elements: Setup, measure, diagnose, menu, clear, enter, back keys, navigation cursor cross, alphanumeric keyboard and on/off button Multicolour LED for laser status and alignment condition Resolution: 320 x 240 pixel; Dimensions: 89 mm diagonal USB host and USB device (slave) Integrated wireless communication, transmitting power 100 mW
Display
2. Measure
LED indicators
External interface
RS232 (serial) for sensor AC adapter/charger socket Environmental protection IP 65 (dustproof and water spray resistant), shockproof Relative humidity 10 % to 90 % Temperature
3. Diagnose
Operating temp: -10 °C to 50 °C, Storage temp: -20 °C to 60 °C
Included Accessories Ordering Information Laser Sensor, Laser Prism, Chain- type Mounting Bracket with 150 mm Support Posts (2x), 300 mm Support Post (4x), Micro-fiber Cleaning Cloth, Sensor Cable, PC Cable, USB Drive, USB Cable, Tape Measure, Wireless Bluetooth Module, Power Adapter, Instruction Kit and Carrying Case. FLK-830 Laser Shaft Alignment Tool FLUKE-830 /SHIMS Laser Alignment Tool Kit
Dimensions and Weight
220 mm x 165 mm x 45 mm, 742 g
Sensor Measurement principle Coaxial, reflected laser beam Environmental protection IP 67 (submersible, dustproof) Ambient light protection Yes Temperature
Storage: -20 °C to 80 °C, Operating: 0 °C to 55 °C
Dimensions
107 mm x 70 mm x 49 mm
Weight
177 g
Type: Ga-Al-As semiconductor laser Wavelength (typical) 675 nm (red, visible) Safety class: Class 2, FDA 21 CFR 1000 and 1040 Beam power: < 1 mW Safety precautions: Do not look into laser beam
Laser
C ontact your local distributor for price and availability. www.fluke.com/au/wtb
132
Mechanical Maintenance
Made with FlippingBook Learn more on our blog