Fluke 438-II Power Quality and Motor Analyser
Recommended Accessories
Quickly and easily discover electrical and mechanical performance of electric motors and evaluate power quality with a single test tool The Fluke 438-II Power Quality and Motor Analyser adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 430 Series II Power Quality Analysers. Quickly and easily measure and analyse key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. • Measure key parameters on direct-on-line motors including torque, RPM, mechanical power and motor efficiency • Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines • Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you’re ready to go • Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency • Identify power quality issues such as dips, swells, transients, harmonics and unbalance • Waveform capture function captures 100/120 cycles (50/60 Hz) of each event detected event, in all modes, without set-up • Automatic transient mode captures waveform data at 200 kS/s on all phases simultaneously up to 6 kV • Firmware upgrade package available to add motor analysis capabilities to existing Fluke 434-II, 435-II and 437-II Power Quality Analysers • Safety rated for industrial applications 600 V CAT IV/ 1000 V CAT III rated for use at the service entrance and downstream • Three year warranty
I430-FLEXI-TF-II-4PK 6000 A Thin Flexi 61 cm (24 in) 4 pack See page 159
i5SPQ3 5A AC Current Clamps, 3 pack See page 159
i400s AC Current Clamp See page 159
GPS430-II Time Synchronisation Module See page 159
Fluke 438-II
C437-II Hard Case with Roller See page 159
C1740 Soft Case See page 159
HH290 Hanging Hook
BP291 4500 mAh capacity
Li-ion Battery See page 159
FLUKE TLS430 Test Leads and Alligator Clips (4 black, 1 green) See page 159
FC-SD CARD Fluke Connect Wireless SD Card See page 11
Motor Measurement Mechanical Motor Power
Resolu- tion 0.1 kW 0.1 hp 0.1 Nm 0.1 lb ft
Included Accessories Test Lead Set, Battery, Power Adapter, 8GB SD Card (438-II/ Basic/INTL only), Soft Carry Case, CD Rom with PowerLog 430-II Software and User Documentation, 4 x 430 Thin Flexible Current Probes (438-II/Intl), Combination WiFi/SD Card (438-II).
Range
Accuracy Default Limit
0.7 kW to 746 kW 1 hp to 1000 hp 0 Nm to 10 000 Nm 0 lb ft to 10 000 lb ft
± 3% 1 ± 3% 1 ± 5% 1 ± 5% 1
100% = rated power 100% = rated power
Torque
100% = rated torque 100% = rated torque
rpm
0 rpm to 3600 rpm 1 rpm ± 3% 1 0% to 100% 0.1% ± 3% 1
100% = rated rpm
Ordering Information
Efficiency Unbalance (NEMA)
NA
Fluke-438-II
Three-Phase Power Quality and Motor Analyser
0% to 100% 0.10% ± 0.15% 5%
Harmonics Voltage Factor (NEMA)* Unbalance Derating Factor Harmonics Derating Factor* Total NEMA Derating Factor*
0 to 0.20
-
± 1.5% 0.15
Fluke-438-II/ BASIC
Three-Phase Power Quality and Motor Analyser (without current flexis and FC WiFi SD card) Three-Phase Power Quality and Motor Analyser, International Version (without FC WiFi SD card) Motor Analyser Upgrade Kit (Fluke 434-II, 435-II & 437-II)
0.7 to 1.0
-
indicative NA
0.7 to 1.0
-
indicative NA
Fluke-438-II/ INTL
0.5 to 1.0
-
indicative NA
1 Add 5% error when selecting Motor design type Other Specification valid for Motor Power > 30% of rated power Specification valid at stable operating temperature. Run the motor for at least 1 hour at full load (2-3 hours if the motor is 50 HP or higher) to obtain stable temperature.
Fluke-430- II/MA
www.fluke.com/au/PQ
Power Quality Analysers
93
Made with FlippingBook Learn more on our blog