HOW TO INSTALL BIRDSMOUTH HORIZONTAL RAILING/ CONTINUED TREX SELECT® T-RAIL
7c
7a
Installing Railing Section to Posts 7a.U sing scrap material (i.e. 2 x 4s, decking
boards,etc.) cut at least three support blocks at 3-3/4" in height. Place
3-3/4"
one each on decking surface beside each post and one near center of span.
7c.Install both bottom and T-Rail Birdsmouth bracket post sleeve using four #9-16 x 1 3/4" screws (provided) per bracket. Note screws are installed on angle.
7b
8. Attaching Post Caps and Installing Foot Block See instructions on page 4.
7b. L ift secured railing section up above posts and slide down into position between posts.
NOTE: To help stabilize railing section use a quick-grip clamp (or other type of clamp) and clamp the first baluster to post sleeve. (DO NOT OVERTIGHTEN CLAMP.)
11
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
T-RAIL-0525
Made with FlippingBook. PDF to flipbook with ease