HOW TO INSTALL 22.5˚ HORIZONTAL ANGLE RAILING TREX SELECT® T-RAIL
NOTES: » Trex Select T-Rail brackets are designed to be installed at 22.5° angle only and only for horizontal applications. Ensure post placements are set to accommodate this angle so railing is install on flat side of post. » Brackets must be installed on rails first (see standard horizontal instructions for reference). » W hen installing railing to posts, the brackets may need to be located slightly off center (rails will be centered). Measure and mark first before attachment to rail to ensure railing are centered. PARTS
4 x 4 OR 6 x 6 Post Sleeve
6 x 6 Post Sleeve
4 x 4 Post Sleeve
Left T-Rail Angle Bracket
Right T-Rail Angle Bracket
1
Measure and Cutting Railings 1. Measure between the posts and cut both bottom rail and T-Rail to proper angles.
R
2. Follow previous instructions, ensuring to follow proper steps if using gaskets and bracket covers.
L
T-Rail(top view)
Bottom Rail (top view)
9
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
T-RAIL-0525
Made with FlippingBook. PDF to flipbook with ease