» Cut hole to fish wire going up through side of joists. Apply butyl caulk around wire piece and tape over wire. (21C)
22
SIDE VIEW
DECKING
MAXIMUM DEPTH FOR TROUGH IS 4 "
4 "
21C
TAPE PATCH
TROUGH
WIRE
TROUGH SHOULD NOT MAKE CONTACT WITH THE RECESSED CAN LIGHT
OPTION: ADD A PIECE OF CEMENT SIDING OR DRYWALL TO DEFLECT THE HEAT FROM THE LIGHT
23. DECK STEP » Install the downspouts and troughs on the lower deck. (1) » Install trough material starting from the lower deck working your way up the stair tread to the upper deck. Overlap the trough material from step 1. (2) » Install the trough and downspouts on the top deck. (3) » After step 3 is complete, finish the installation of the troughs and downspouts on the upper deck. » Tape over all exposed seams and where deck screws will penetrate.
#2 THROUGH OPENING WHERE DOWNSPOUTS MEET TROUGH
21D
WIRE
23
» Fish wire up through the gap between the trough and downspout. (21D)
ON THE UPPER DECK ADD A BEAD OF BUTYL CAULK ON TOP OF THE FIRST JOIST
BEFORE INSTALLING THE FIRST TROUGH ON THE UPPER DECK, ADD A BEAD OF BUTYL CAULK ON TOP OF THE TROUGH MATERIAL THAT EXTENDS THE LENGTH OF THE DECK
21E
3
2
ON THE LOWER DECK, ADD A BEAD OF BUTYL CAULK WHERE THE UPPER DECK FRAMING MEETS THE LOWER DECK FRAMING
22. INSTALLING LOW PROFILE CAN LIGHTS » When installing low profile can lights below the trough, make sure the light does not come in contact with the trough material. (22)
1
TAPE ALL EXPOSED
SEAMS WHERE DECK
PENETRATION WILL OCCUR
21 19
Made with FlippingBook - professional solution for displaying marketing and sales documents online