1. PREPARATION » Read all instructions completely before beginning. » Place midspan nailer (1) or vertical blocking (1A) to keep joist straight and prevent rolling. » Midspan nailer can be removed when soffit or ceiling is installed.
2A
12" CENTER
16" CENTER
10-1/4"
14-1/2"
10"
1
4"
5-1/4"
» Downspout should extend 1" into gutter: cut or extend as necessary. (2C)
PLACE A TEMPORARY NAILER UNDER JOIST
2B
1A
SIDE VIEW
MAXIMUM DEPTH FOR TROUGH IS 4 "
4 "
BLOCK BELOW THE TROUGH SYSTEM
BLOCKING
2. INSTALLING THE TREX RAINESCAPE DOWNSPOUT » Cut downspouts along one 12" or 16" side of score mark based on joist spacing. » Install all downspouts along rim joist and/or ledger board. Cut-out side should face open deck bay.
2C
SIDE VIEW
DOWNSPOUT SHOULD EXTEND ABOUT 1" INTO THE GUTTER
2
TEAR OUT OPENING AS MARKED ON THE DOWNSPOUT. (IN COOLER WEATHER USE A UTILITY KNIFE)
5
Made with FlippingBook - professional solution for displaying marketing and sales documents online