IN-POOL COLLECTION
LLC In-Pool Lounger (White shown LLC-W) Weight: 34 lbs. (empty) 144 lbs. (full)
LLCD Raised In-Pool Lounger (White shown LLCD-W) 23"W 74.69"D 31"H Weight: 51 lbs. (empty) 264 lbs. (full) The Raised Chaise Lounge is designed for deeper pool ledge installations. This chaise is designed for water depth of no more than 15”. Installation instructions are the same as for the regular in-pool lounger. This chaise can be used out of the water, too. If used out of the water it is recommended it be filled with water to add more weight. Installation Procedure is same as described for In-Pool Lounger above. When you receive it, remove the threaded plugs using a flathead screwdriver, then submerge it in your pool, fill it completely with water, replace the plugs and pull it on to the ledge. Once in place, weighing over 100 lbs, the Contour In-Pool Lounger will stay put and shouldn’t need to be moved except for season storage. Clean it in place with common household cleaners. Removing them from the pool is not necessary but if desired the Contour In-Pool Lounger is easily stackable. White In-Pool Lounger available in stock for quick shipment. The Contour In-Pool Lounger is designed for use in up to 9” of water depth. Installation
LLCR High Back Chair (White shown LLCR-W) Weight: 33 lbs. (empty) 133 lbs. (full)
The High Back Chair features a contoured shape for comfort and lumbar support. Do not place on a pool ledge deeper than 9”. The chair can be used in or out of the water. Installation Procedure is same as described for In-Pool Lounger above.
LLST-14-T Side Table (White shown LLST-14-TW) Weight: 12 lbs. (empty) 78 lbs. (full) The Side table should be filled with water for installation and should be used in water no more than 10” deep. The umbrella hole accommodates umbrella poles up to 2" in dia. A built-in umbrella sleeve in your pool or patio is required for pairing with an umbrella. Do not use umbrella with table in windy conditions and/or when unattended. This table will hold up to a 6’ square or 8’ octogan umbrella. To install simply submerge the table in the water to fill then pull it onto the pool ledge. The side table includes specific fitting inserts for the umbrella hole to secure umbrella pole in the table.
Made in the USA
147 www.texacraft.com
Made with FlippingBook Learn more on our blog