1/2 in. OLD MILL ® SHINGLE LAP
48-13/16 in.
1-1/2 in. Scribe Line
TruWood Old Mill ® Shingle Lap Siding goes up fast and easy. It requires no special tools for installation and it comes in easy to handle 4 ft. lengths and a convenient shiplap edge.
5 in.
5 in.
6-3/4 in.
7 in.
9-1/2 in.
6 in.
4-1/2 in.
5-1/16 in.
SPECIFICATIONS:
TruWood Siding and Trim meet the requirements of the following:
Approx Coverage Sq. Ft./ Unit
Sq. Ft. Needed To Cover 1,000 Sq. Ft. of Wall Area
Lap Size Approx. Weight Lbs./Unit 1/2 in. x 11-1/2 in. x 48-13/16 in. 140 9-3/4 3.25 432 1238 985 *Allows for a 1.75 in. overlap and assumes a 5% waste factor. Pc./ Unit Maximum Exposure in inches Sq. Ft. Coverage Per Piece
2018 International Building Code 2018 International Residential Code ICC ESR-2588 American National Standard ANSI-CPA 135.6 – 2012 California Wildland-Urban Interface (WUI) Fire rating = Class C R Value = 0.67 (hour) (Sq. Ft.) (Fahrenheit) per BTU 1/2 in. Lap Siding = No Shear Value CAL. PROP 65 WARNING: Use of this product may result in exposure to wood dust, known to the State of California to cause cancer. PROPER STORAGE AND HANDLING • Store siding flat and support on stringers to avoid sagging and contact with the ground • Siding must be covered and protected from the elements • Stack no more than eight units high • Allow siding to acclimatize to local conditions prior to installation
TO FIND YOUR NEAREST DISTRIBUTOR, WARRANTY INFORMATION, INSTALLATION INSTRUCTIONS, CARE AND MAINTENANCE INSTRUCTIONS, A SIDING CALCULATOR, OR TO VIEW OUR PRODUCTS ON SAMPLE HOMES USING OUR VISUALIZER TOOL, HEAD TO TruWoodSiding.com. CAN’T FIND WHAT YOU NEED? 800.417.3674
©2021 Collins 5/21 2.5M TW121 Manufactured in Klamath Falls, OR, USA
Made with FlippingBook - Online Brochure Maker