Limited Warranty
Design Options
10-YEAR PRO-RATED LIMITED WARRANTY
ORNAMENTAL LATTICE & GUARDRAILS
COLUMNS
METAL ROOF
Powder Coat Warranty This limited warranty is for the factory applied Superdurable powder coating. This 10-year pro-rated limited warranty is intended to define the obligations and limitations of the purchaser as well as the obligations and limitations of the supplier. This limited warranty is only valid if SRP has been paid in full for the cost of the shelter. Damage occurring from shipping, erection, vandalism, accidents, or field modifications will require field touch-up immediately and periodically thereafter, which is not covered in this limited warranty. Exposed nuts and bolts will either be supplied with a light plating or powder coating. It is the responsibility of the contractor to paint and/or touch up the nuts and bolts after erection and these must be maintained by the customer. The 10-year limited warranty will exclude buildings erected at sites where salt air, corrosive environment, high humidity or sprinkler systems come in contact with the shelter. Failure to maintain finish system with annual touch-up and documented maintenance procedures will void the limited warranty. Not covered by this limited warranty are acute angles, end plates, and other accessories that are prone to minor defects on occasions and will require touch-up by owner. Failure of the coating will be defined when at least 8% of the total coated surface has significant loss of performance or appearance characteristics when compared to the original finish. Rust stains from roof trim, screws, and screw holes do not constitute a failure.
If a claim is made for paint failure a complete document must be provided by the owner. If a site visit is required by SRP the travel expenses will be covered by the customer prior to travel taking place. However, should the failure be determined to be under the limited warranty the customer will be reimbursed for these expenses. In the case of a failed paint system, SRP will repaint the structure with its best in-house system providing that the owner dismantles the structure and returns it to SRP. SRP will refinish the structure and ship it back to job site at their expense. The refinishing will not extend the original warranty of the paint system. The owner is responsible for erecting the building at their expense. As an alternative, SRP will pay customer up to the cost of the original paint system on a pro-rated basis for time left of the 10 year limited warranty. Cancellation and Return Policy To view our return policy, please visit superiorrecreationalproducts.com/returns. Shipping Policy To view our shipping policy, please visit superiorrecreationalproducts.com/shipping-policy.
Superior Recreational Products (SRP) provides a 10- year pro-rated limited warranty from shipping date with the following limitations. SRP limits its warranty to the supply of materials that will assemble according to sealed engineered drawings and installation instructions, and can be assembled with normal expertise and with tools required and found in the construction trades. It is expressly understood that SRP’s liability be limited to repair or replacement of nonconforming material at time of delivery. SRP does not warrant product for defects caused by erection, harsh site conditions, lack of maintenance, and/or other conditions beyond SRP’s control. SRP will not be held responsible for any materials that were not properly stored prior to installation. SRP reserves the right to void the limited warranty if it not installed per the installation instructions and/or unauthorized modifications. SRP shall not be held liable for field alterations. SRP shall only be liable for meeting the building code indicated on the sealed engineered drawings. Any replacement part under warranty is warranted for the remaining original warranty period or six (6) months, whichever is longer. This Limited Warranty supersedes all other warranties expressed or implied. The warranty on items not manufactured by SRP (i.e. metal roofing, shingles, wood shelters), will be as passed through SRP’s supplier as per their warranty; contact Customer Service for this Supplier Warranty. This Limited Warranty is conditional upon payment in full to SRP within terms. Liability under this Warranty is limited in that it shall not exceed the original sales price of the components as supplied by SRP.
24 Gauge R-Panel Profile
36" Cover Width
24 Gauge Medallion-Lok Profile
Optional Standing Seam 16" Coverage Area
Tampa
Square Round
Carmel
Diamond
OTHER OPTIONS • Electrical Access and Cutouts • Sealed Engineering • Internal or External Anchor Bolts
BASE SHOE COVER Structures engineered with exterior anchor bolts at finish grade can be hidden with base shoe covers.
CUPOLA Our steel cupola is available for most shelter styles. The roof color of your cupola will match the roof color of your shelter.
Sheet Metal Non-Vented
Color Options
*Actual colors may vary slightly from those shown.
STEEL FRAME COLORS
METAL ROOF COLORS
View online at srpshelter.com/warranty.
Gloss
Standard
Regal White
Royal Purple
Bone White
Matte Black
Patrician Bronze
Dark Bronze
Medium Bronze
Slate Gray
Ice Butter
Periwinkle
Certified Fabricator
Yellow
Butterscotch
Burgundy
Orange
Red
Charcoal
Spring Green
Sky Blue
Ash Gray
Surrey Beige
Tudor Brown
Ice Mint
Chartreuse
Ocean
Sandstone Almond Mansard Brown
Sea Mist
Blue
Brandywine Colonial Red
Azure
• LADBS Certified Fabricator • City of Houston Registered Fabricator • Clark County Approved Fabricator *Certificates available upon request.
Bright Red
Regal Blue
Roman Blue
Hartford Green
Dark Green
Evergreen Patina Green
Green
Beige
Vanilla White Black
Sage Brown
Matte or Metallic
Metallic
Not Painted
Galvalume Plus
Copper Penny
Made in the USA
Champagne Metallic Bronze Starlight
16
Made with FlippingBook - Online catalogs