Irrigation Sets
EASY INSTALLATION Before use, make sure that the product is sterile. The product is intended to be sterile when the packaging is intact and doesn’t show any damage. If the blister is intact, remove the irrigation set from the sterile packaging.
Insert the vented spike in the liquid cooling bag or connect the irrigation system through the Luer Lock. The vented spike comes with an air filter, made by a cap to be opened and closed in order to regulate the flow of the cooling liquid.
Remove the cap from the vented spike.
Where foreseen, adjust the flow with the roller.
Insert the hose in the peristaltic pump, check the flow direction
and use the appropriate connection at the end of the silicone hose.
Connect the final hose to the three ways tap and regulate the flow direction.
Connect the final part of the irrigation hose to the contra-angle. Omnia irrigation sets offer the following options: a. Single way internal irrigation b. Single way external irrigation c. Double way internal and external irrigation, with an Y connection supplied in the packaging.
Fix the irrigation hose to the cord of the micro motor using the clips included: S tube holders for Physiodispenser and heparin hook for piezosurgery.
ACCESSORIES INCLUDED IN THE PACKAGING For those who use the double irrigation, each irrigation set contains the following accessories:
Y JOINTS In case of double irrigation, it is possible to use this joint, (Y connector in nylon and silicone tubings) which turns the single irriga- tion into double.
CORD HOLDER HOOK When the diameter of the cord of the physiodispenser is very large, it is possible to use these hooks to fix it to the irrigation line. S SHAPED CLIPS The practical S shaped clips allow to fix the irrigation hose to the cord of the micro motor.
D606
Made with FlippingBook Annual report