HuFriedyGroup | Product Catalog

Manual Irrigation

Omnirrigator

Omnirrigator Manual irrigation system with button-driven flow regulator that enables the assistant to keep the operation field clean and further cool the implant site. The system is also suitable for irrigation during final screwing of the implant by means of a dynamometric key. The tube fitted with the perforating needle to be inserted into the saline solution bag. The irrigation tube is 200 cm long. 5 pcs 32.F1007.00

Accessories for manual Irrigation

Sterile distilled water irrigation solution Accessories for manual irrigation to complement mechanical irrigation systems. They may be used to customize cooling lines according to your own needs. If a special irrigation line with peristaltic pump block is not available, the system can be composed by combining the items listed below. Perforator for Hand Fuser with female Luer connector, 10 pcs 32.F0116.00 Tubing extension with Luer without piercing pin, 10 pcs 32.F0016.00

Detail of the perforator

Sterile distilled water irrigation solution Terminal irrigation needle for Omnirrigator, in PVC, 50 pcs Manual irrigation set with sliding flow adjuster for contra-angle, 10 pcs The irrigation system 32.F0157.00 is a semi-manual system, which may be connected to the Hand Fuser system through the perforator, or it may be directly connected to the contra-angle through a hook-shaped flow adjuster. The practical sliding button, which must be hooked to the handpiece, allows stopping or adjusting flow strength.

32.F1003.00

32.F0157.00

D610

Made with FlippingBook Annual report