CAST IRON SELF-PRIMING CENTRIFUGAL COMMERCIAL PUMP D-SERIES ™
Featured Highlights
• Especially designed for commercial applications where high-performance and self-priming characteristics are desired • These self-priming, high-performance pumps are available in high head and medium head models, providing a complete range of performance characteristics • Motors are open drip-proof, continuous duty rated 3450 RPM
D Series Cast Iron Self-Priming Centrifugal Commercial Pump
Ordering Information
Port Size (NPT)
Carton Wt. (Lbs.)
Curve Key
Primary Listings and Certifications 3
Product
Voltage*
Amps 1
HP
STANDARD EFFICIENCY THREE PHASE HIGH HEAD
DHH3-169 DMH3-171
230/460 230/460
8.6/4.3 8.6/4.3
3 3
NSF 2 NSF 2
1-1/2 in.
135 135
A C
2 in.
STANDARD EFFICIENCY THREE PHASE MEDIUM HEAD
DHJ3-170 DMJ3-172
230/460 230/460
13.2/6.6 13.2/6.6
5 5
NSF 2 NSF 2
2 in.
178 178
B D
2-1/2 in.
This product either meets or is exempt from the DOE Dedicated Purpose Pool Pump regulation. This product will remain available after the DOE regulation takes effect in July 2021.
* 200 Volt models available. Contact factory for details. 1 Dimensions and Max Load Amps may vary per motor manufacturer. 2 ‘NSF(1)’ indicates that pump bears a mark signifying evaluation to NSF Standard 50 For Self-Priming Centrifugal Pumps For Swimming Pools, Spas and Hot Tubs when installed with a NSF certified Hair and Lint Strainer.
3 Product may have been evaluated to other state and local regulatory standards. Listing status may change. Always confirm status with appropriate agency if in doubt.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm. AVERTISSEMENT: Peut Causer le Cancer et des Dommages au Système Reproducteur. P/N 200174.A www.p65warnings.ca.gov. ADVERTENCIA: Cáncer y Daño Reproductivo.
224
SEE PAGE 425 FOR REPLACEMENT PARTS
Made with FlippingBook - PDF hosting