STAINLESS STEEL SUBMERSIBLE POOL SERVICE PUMP PCD-1000 SUBMERSIBLE PUMP
Featured Highlights • 115V, 60 Hz single phase, permanent split capacitor motor • Automatic thermal overload protection • Clog-resistant cast stainless steel impeller • Accommodates water temperatures ranging from 32 degrees F to 130 degrees F • Permanently lubricated ball bearings • Equipped with 15-foot, 18/3 grounding type power cord
Submersible Pool Service Pump
• Convenient top-mounted handle • Rubber feet to reduce scratching • Optional float switch included
The PCD–1000 submersible, portable, high capacity pump designed for use by the professional in draining pools and spas as well as for general purpose applications, now has improved flow rates, and stainless steel casing, suction strainer, impeller and shaft for greater corrosion resistance and longer service life. The PCD-1000 can pump water down to 1-3/8 inches in depth. Debris and stones up to 3/4 inch are able to pass through the pump. It also features a 1-1/4 inch discharge port for faster draining. Discharge port adapters are included. Optional float switch included; switch stops pump when low water level reached. Remove float switch for constant run.
Adaptors included: • 1-1/4 in. Female NPT Elbow • 1-1/4 in. Male NPT to 1-1/2 in. Female NPT Adaptor
Optional Float Switch Included
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm. AVERTISSEMENT: Peut Causer le Cancer et des Dommages au Système Reproducteur. P/N 200174.A www.p65warnings.ca.gov. ADVERTENCIA: Cáncer y Daño Reproductivo.
Ordering Information
Full Load Amps
Carton Wt. (Lbs.)
Product
Description
Voltage
HP
STAINLESS STEEL SUBMERSIBLE WITH BRASS BASE
PCD-1000
Submersible Utility Pump
115
6.4
3/4
15
ACCESSORIES
ZBR46760
Replacement Float Switch
This product either meets or is exempt from the DOE Dedicated Purpose Pool Pump regulation. This product will remain available after the DOE regulation takes effect in July 2021.
Dimensions and Performance
Motor Full Load (Amps)
Liquid Temperature Range
Switch Setting
Minimum Circuit Req.
Pumps Down To
Model
HP
RPM
On
Off
PCD-1000
3 ⁄
6.4
3450
15 amps 32/130°F 0/54°C
12" 30 cm
6" 15.2 cm
1 3 ⁄ 8 " 3.5 cm
4
Pump Performance TDH/GPM
Shut Off Head
TDH
5'
10'
15'
20'
25' 8.5
28
GPM 55
45.5
36.5
25
N/A
230
SEE PAGE 425 FOR REPLACEMENT PARTS
Made with FlippingBook - PDF hosting