FIBERGLASS REINFORCED POLYPROPYLENE TANK CLEAN & CLEAR ® PLUS FILTERS
Featured Highlights
• Certified to NSF/ANSI Standard 50 • Large filter area for increased dirt capacity • 1-1/2 in., 100% drain clean-out port • Continuous High Flow ™ Internal Air Relief * • Base and plumbing kits available • Injection molded tank • Balanced hydraulic flow • Tension Control ™ Clamp • Black bulkhead unions • High Flow manual air relief valve
Inlet
Outlet
Clean & Clear Plus Filter
Clean & Clear Plus Filters have a corrosion resistant injection molded filter tank featuring strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation. Watch safety video on: pentair.com/poolfiltersafety Ordering Information
*Integrated Continuous High Flow Internal Air Relief is operational only when there is unobstructed flow in the circulating system.
Turnover Capacity (In Gallons)
Carton Qty.
Carton Wt. (Lbs.)
Effective Filtration Area (Sq. Ft.)
Flow Rate 2 (GPM Res)
Product
Model
8 Hour
10 Hour
12 Hour
CLEAN & CLEAR PLUS FILTERS
160340
CCP320 1
320
120
57,600
72,000
86,400
1
70
420
150
72,000
90,000
108,000
1
80
160301
CCP420 1
520
150
72,000
90,000
108,000
1
90
160332
CCP520 1
CLEAN & CLEAR PLUS REPLACEMENT CARTRIDGES
179133 Model 240 Pleatco Ultra Replacement Cartridges (4/Pack) ULTRA-A4-PAK4 Model 240 Pleatco Ultra Replacement Cartridges (4/Pack) 179134 Model 320 Pleatco Ultra Replacement Cartridges (4/Pack) ULTRA-A5-PAK4 Model 320 Pleatco Ultra Replacement Cartridges (4/Pack) 179135 Model 420 Pleatco Ultra Replacement Cartridges (4/Pack) ULTRA-A6-PAK4 Model 420 Pleatco Ultra Replacement Cartridges (4/Pack) 179136 Model 520 Pleatco Ultra Replacement Cartridges (4/Pack) ULTRA-A7-PAK4 Model 520 Pleatco Ultra Replacement Cartridges (4/Pack) 1 Certified to NSF/ANSI Standard 50. 2 Residential rate .375 GPM per sq. ft. of filter area.
Dimensions and Performance
Vertical Clearance to remove filter elements
Note: Actual system flow will depend on plumbing size and other system components. Note: Pentair does not recommend flow rates above 150 GPM. Note: Operating Limits – maximum continual operating pressure of 50 PSI. Pool/spa (bather) applications, maximum operating water temperature (internal filter) 104°F (40°C) .
B
A
15-½”
CALIFORNIA PROPOSITION 65 WARNING
8”
WARNING: Cancer and Reproductive Harm. AVERTISSEMENT: Peut Causer le Cancer et des Dommages au Système Reproducteur. P/N 200174.A www.p65warnings.ca.gov. ADVERTENCIA: Cáncer y Daño Reproductivo.
21-½”
43
SEE PAGE 329 FOR REPLACEMENT PARTS
Made with FlippingBook - PDF hosting