THS SERIES ® HORIZONTAL SAND FILTER
• Five sizes to 27 sq. ft. • Manway in front for easier access and smaller footprint • Manway with Viewport Standard • 6 in. flanged connections, 4 in. victaulic on the THS Series 3461 • Optional manual, semi-automatic, and automatic backwash systems for one and two tank systems • Two backwash controllers to choose from • Influent manifold distribution to prevent clogging • NSF certified from 5–20 gpm/sq. ft. Featured Highlights
THS Series Horizontal Sand Filter
The THS Series Filter is an NSF certified 50 psi rated tank with flow rates up to 535 gallons per minute. The filter shell is manufactured from a lasting composite laminate design that makes winding unnecessary. Vessels feature all-weather exterior coating with UV inhibitors. Ordering Information
Filter Media
Effective Filtration Area (Sq. Ft.)
Flow Rate (15 GPM/ Sq. Ft.)
6 Hour Turnover Capacity (In Gallons)
All Sand Required (Lbs.)
Carton Wt. (Lbs.)
Product
Model
Description
Pea Gravel Required (Lbs.)
Sand Required (Lbs.)
THS SERIES HORIZONTAL FILTER
THS 34 in. x 61 in. THS 34 in. x 84 in. THS 42 in. x 72 in. THS 42 in. x 84 in. THS 42 in. x 96 in.
143461 THS3461
13.5
203
73,080
300
1250
1550
550
19.0
285
102,600
600
1350
1950
610
143484 THS3484
19.7
295
106,200
500
2100
2600
650
144272 THS4272
23.2
348
125,280
600
2400
3000
725
144284 THS4284
26.7
400
144,000
700
2800
3500
800
144296 THS4296
CONTROLLERS (MUST USE WITH DIAPHRAGM VALVES MANIFOLD KITS)
156400
Single THS manual controller 6 in. FP
156850
Single THS CA100 autobackwash controller
156450
Dual THS manual controller 6 in. FP
CS400-01 CS400 backwash controller for single tank system
156800
Dual THS CA100 autobackwash controller
CS400-02 CS400 backwash controller for dual tank system
CS 400 Commercial Backwash Controller This controller is programmable and controls every aspect of the backwash cycle once initiated. Backwash can be initiated three ways: by an operator with the touch of a button, by a signal from a master controller (such as the AK600), or by a signal from an optional differential pressure switch (CS400- DP). Stored backwash data and history, alarms, and calculated backwash cycle times are also features of the CS400 controller, as are relays for communication with the heater, pump and Acu Drive.
CM200 Manual Backwash Controller This is the simplest Pentair option. No electronics or programming required. Simply turn the knob to backwash each tank in the system.
CA 100 Fully Automatic Backwash Controller This is a comprehensive backwash controller and can be readily reprogrammed to initiate backwash automatically based on differential pressure (integral pressure transducers are standard), time (internal seven-day clock with battery back-up is standard), flow (with optional flow sensor), or any combination of the above. The controller has real-time display of operation mode, filter flow rate, and water temperature (with optional temperature probe). Also, includes Energy Saver Mode for simple On/Off pump scheduling and various interlocks and relays to communicate with other equipment (pump, heater, Acu Drive).
74
SEE PAGE 329 FOR REPLACEMENT PARTS
Made with FlippingBook - PDF hosting