POOL AND SPA HEATER MAX-E-THERM ®
Featured Highlights
• Now with smart connectivity, it’s easier than ever to get the pool warm and ready whenever it’s needed • Digital connectivity with your pool’s automation system and an advanced ignition control module with flame strength sensor help to ensure optimal heater performance • Max-E-Therm Heater is certified for low NOx emissions* • Multi-position top panel allows digital display to be re-positioned for convenient operation • Tough, rustproof exterior handles the heat and weathers the elements • Certified for outdoor and indoor installations • Optional Smart Heater Bypass valve control diverts water flow when the heater isn’t needed
Max-E-Therm Pool and Spa Heater
For indoor or outdoor installations on pools and spas. Features include an LCD temperature readout with dual thermostat controls, temperature safety lockout, and six-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas ™ Resin provides rust-proof construction. Heavy-duty (HD) unit with cupro-nickel exchanger for improved performance in more challenging applications, like low pH, high flow or heavy use. Ordering Information
Heat Exchanger Efficiency
Product
Description
BTU (000’s)
Carton Wt.
MAX-E-THERM POOL/SPA HEATER
SR200NA Max-E-Therm 200 BTU Natural Gas Heater
200 200 200 333 333 333 400 400 400
84% 84% 82% 84% 84% 82% 84% 84% 82%
131 131 131 138 138 138 138 138 138
SR200LP
Max-E-Therm 200 BTU Propane Gas Heater
SR200HD Max-E-Therm 200 BTU Heavy Duty Heater SR333NA Max-E-Therm 333 BTU Natural Gas Heater
SR333LP
Max-E-Therm 333 BTU Propane Gas Heater
SR333HD Max-E-Therm 333 BTU Heavy Duty Heater SR400NA Max-E-Therm 400 BTU Natural Gas Heater
SR400LP
Max-E-Therm 400 BTU Propane Gas Heater
SR400HD Max-E-Therm 400 BTU Heavy Duty Heater
475002 462048
Air Intake Kit
Smart Heater Bypass Kit *Certified by a third party test lab and communicated to SCAQMD for Rule 1146.2
*Savings amount based on lab testing conducted using MasterTemp 400® heater in conjunction with IntelliFlo® VSF Pump and Bypass Kit, which includes IntelliValve® controlled by heater. Test Conditions: Pump flow rate: 50gpm. Pump run time: 3000 hours/yr. Heater run time: 100 hours/yr. Electrical Cost: $0.21 per kWh. System TDH: Heater and Bypass Kit added to Standardized “Curve C” System Curve performance data as per California Energy Commission Title 20 Appliance Efficiency Regulations. Test conditions assume pump flow rate of 50gpm and Constant Flow operation utilizing a lower motor RPM when flow is bypassing the heater due to lower system TDH. Actual performance and any subsequent energy consumption/savings are dependent upon various characteristics of the plumbing system, including but not limited to, pipe size, pipe lengths, filter type, fittings, system design, equipment run time/settings and more.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm. AVERTISSEMENT: Peut Causer le Cancer et des Dommages au Système Reproducteur. P/N 200174.A www.p65warnings.ca.gov. ADVERTENCIA: Cáncer y Daño Reproductivo.
92
SEE PAGE 363 FOR REPLACEMENT PARTS
Made with FlippingBook - PDF hosting